Overview
The Baer Brakes 4262265R is a red SS4 Plus rear brake system for Ford 9 Inch rear axles with Torino (late big) bearing housing ends and a 5×5.00 bolt pattern. The four-piston S4 caliper clamps a 13 inch two-piece slotted, drilled and zinc-plated rotor, and the system includes a park brake shoe.
This system is intended for wheels of 17 inches or larger. It cannot guarantee fit into every wheel style, because wheel makers and designs vary widely, so compare the matching template to the chosen wheel before fitting.
Key features
- Four-piston S4 caliper in a red powder coated finish
- Two-piece slotted, drilled, zinc-plated vented rotor with a billet aluminum hat
- Dual seals guard against dust, weather and pressure
- Hard anodized aluminum pistons with stainless steel abutments and noise suppression clips
- Park brake shoe assembly housed in Baer’s backing plate
- Steel braided hoses carrying DOT approval, with stainless hardware included
- Rotors pre-assembled with NAS high grade stainless hardware
Choosing a rear brake upgrade
Rear brake upgrades usually come into play when a heavier build, larger tires or more frequent hard stops ask more of the stock setup. A disc conversion on a rear axle changes the braking balance, so it is worth looking at the front brakes, master cylinder and proportioning valve together rather than treating the rear as a standalone part. Parts sold as a complete system tend to match better in pad compound, rotor size and hydraulic flow than mixed components.
Before ordering, confirm the wheel clearance, the axle flange and the parking brake layout on the vehicle. Park brake hardware varies between setups, and a shoe without cables or a compatible lever leaves the parking function incomplete. Plan for bleeding the hydraulic lines, bedding in new pads and a short test in a clear area before using the vehicle on public roads.
- Check wheel clearance against the caliper and rotor
- Confirm the park brake cable routing before installation
- Replace rear pads and rotors together to keep wear even
- Inspect hoses for chafing where they pass the suspension
- Use brake fluid from a sealed container and keep it dry
Specifications
| Brand | Baer Brakes |
|---|---|
| Part number | 4262265R |
| UPC | 844165028642 |
| Caliper | S4, fixed type, red |
| Piston quantity | 4 per caliper |
| Rotor outside diameter | 13.0 Inch |
| Rotor construction | 2-piece, vented, slotted, drilled |
| Rotor material | Iron with aluminum hat |
| Rotor thickness | 0.81 |
| Surface finish | Zinc plated |
| Pad FMSI number | DR1-C |
| Lug count | 5 Lug |
| Wheel bolt pattern | 5×5.00 |
| Minimum wheel diameter | 17.0 Inch |
| Axle flange | Ford 9 Inch Torino/Late Big Bearing |
| Hose material | Steel braided |
| Brake hose DOT approved | Yes |
| Park brake included | Yes |
| Park brake cables included | No |
| Grade | Performance |
| Template | S135H |
| Sold as | Kit |
| Country of origin | US |
Vehicle fitment
No vehicle list is available for this kit. It is written for the Ford 9 Inch rear axle with Torino (late big) bearing housing ends and 5×5.00 bolts, and the 17.0 Inch minimum wheel diameter is the main wheel-side requirement.
Installation notes
Park brake cables are not included, so the park brake shoe needs cabling sourced separately. Use the included steel braided hoses and stainless hardware, and check the template against the chosen wheel before mounting. Have a qualified brake technician install the system, since park brake and hydraulic work directly affects stopping.
What’s included
The kit includes a four-piston S4 caliper set, a two-piece rotor pre-assembled with stainless hardware, steel braided hoses, stainless hardware and a park brake shoe assembly.
Not included: park brake cables, lug nuts and front rotor.















