Overview
The Baer Brakes 4262093R is the red finish of the Extreme Plus rear brake system, built around a six-piston monoblock caliper and a 14.0 inch two-piece rotor. It is made for Ford 8 inch and 9 inch rear axles that use a small bearing housing and a 5×4.50/5×4.75 inch wheel bolt pattern.
Baer manufactures the kit in Phoenix, Arizona, using CNC-machined 2618 aluminum forging. The caliper has stainless pistons and staggered placement to even out pad wear. The backing plate carries a one-piece park brake shoe, so park brake hardware comes with the rear axle kit. The 14 inch rotor is designed to work with most wheels 18 inch or larger.
Key features
- Red powder-coated 6S monoblock caliper with six pistons
- Stainless steel pistons, abutments and noise suppression clips
- Dual seals resist dust, weather and pressure
- Two-piece slotted, drilled and zinc-plated rotor with a billet aluminum hat
- Rotors arrive pre-assembled with NAS high-grade stainless hardware
- Stainless braided hoses included
- Park brake shoe assembly housed in the backing plate
Brake fade and pad choice
Rear disc brakes on a Ford 8 or 9 inch axle work hardest when the vehicle is loaded, towing, or descending a grade. A larger rotor and a multi-piston caliper spread heat across more surface, which helps the pads keep consistent contact over repeated stops. Brake fade is usually the first sign that the friction material or rotor is overheating, so pay attention to a soft pedal or longer stopping distances after a long descent.
Pad choice matters as much as the hardware. Pads should be matched to how the vehicle is used, whether that is mostly street driving, trail work, or towing. Bedding in new pads and rotors with a series of moderate stops helps the friction layer transfer evenly. Check the rotor surface for heavy scoring or uneven wear at each pad change, and replace it when it is below its minimum thickness.
- Replace pads and rotors together when wear is uneven
- Inspect braided hoses for cracking, bulges or leaks
- Check park brake cable routing and adjustment after installation
- Re-torque caliper bracket bolts after the first few drives
Specifications
| Brand | Baer Brakes |
|---|---|
| Part number | 4262093R |
| UPC | 844165035800 |
| Sold as | Kit |
| Axle | Rear |
| Axle flange | Ford 8 inch/9 inch small bearing |
| Caliper | 6S, six-piston monoblock, fixed |
| Caliper color | Red |
| Pad type | D1247 (FMSI) |
| Rotor outside diameter | 14.0 inch |
| Rotor type | Two-piece, slotted, drilled, zinc-plated |
| Rotor material | Iron with aluminum hat |
| Rotor construction | Vented |
| Rotor thickness | 1.25 |
| Wheel bolt pattern | 5×4.50/5×4.75 |
| Lug count | 5 |
| Minimum wheel diameter | 18.0 inch |
| Hose material | Stainless steel |
| Park brake | Included (shoe assembly in backing plate) |
| Template | N085P |
| Grade | Performance |
| Country of origin | US |
Vehicle fitment
The kit is matched by axle type rather than by vehicle, so no vehicle years, makes or models are given. It covers Ford 8 inch and 9 inch rear axles with small bearing housing ends and 5×4.50/5×4.75 inch bolt patterns. Confirm fit for your vehicle’s year, model and trim before ordering.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Use the N085P template to compare the rotor and caliper against your wheels before fitting the kit, because Baer cannot guarantee fit with every wheel style. The rotors come pre-assembled, so the hardware is already set; park brake cables must be sourced separately.
What’s included
The kit contains the rear Extreme Plus brake components: the 6S caliper, 14.0 inch two-piece rotors, stainless braided hoses, stainless hardware and the park brake shoe assembly.
Not included: the kit omits park brake cables and lug nuts, along with any front rotor.















