Overview
The Baer Brakes 6919099 is a 1-piece left replacement brake rotor with a plain finish, measuring 12.000 Inch outside diameter and 1.020 Inch nominal thickness. It is a vented, directional cast iron rotor for select Baer Brake systems, sold one at a time.
The plain surface type identifies this part number. The rotor features curved vanes for cooling, a purpose built casting and dynamic balancing for smooth running. Its design also aims for stability and resistance to distortion. Verify the bolt pattern, center hole and rotor side before installation.
Key features
- Directional rotor made for the left side only
- Curved vanes intended for cooling
- One piece full cast construction in cast iron
- Dynamic balanced for vibration-free running
- Stability and resistance to distortion are cited as design goals
Choosing the right setup
A replacement rotor works as one part of a braking system that includes pads, calipers, brake lines and the wheel hub. Before buying, confirm the rotor’s diameter, thickness and hat height against the existing unit, since differences in these dimensions change how the caliper fits and how much pad contact the rotor receives.
Plain friction surfaces are a common choice for street use, where a smooth face bedded in with new pads can give consistent contact. Pads that are compatible with the rotor material and braking demands should be selected together, and pad manufacturer bedding instructions should be followed closely after installation.
Rotor replacement is often done alongside pad changes, hub bearing checks and inspection of caliper slide pins. Worn slide pins or a seized caliper can cause uneven rotor wear even on a new part, so inspect them while the wheel is off.
- Compare hat height and center hole before ordering
- Replace pads together with rotors on the same axle
- Inspect caliper slide pins during installation
Specifications
| Brand | Baer Brakes |
|---|---|
| Part number | 6919099 |
| UPC | 90127961407 |
| Axle side | Left |
| Surface type | Plain |
| Construction | Full cast, one piece |
| Material | Cast iron |
| Solid or vented | Vented |
| Directional brake surface | Directional |
| Outside diameter | 12.000 Inch |
| Nominal thickness | 1.020 Inch |
| Overall height | 2.406 Inch |
| Center hole diameter | 2.836 Inch |
| Stud/lug hole circle diameter | 4.5 Inch |
| Stud/lug hole quantity | 5 |
| Drum in hat | Yes |
| ABS tone ring included | No |
| Grade type | Performance |
| Emission code | 6 |
| Sold as | Each |
| Country of origin | USA |
Vehicle fitment
Fitment for part number 6919099 is not established here. It is designed for select Baer Brake systems. Confirm fit for your vehicle’s year, model and trim before ordering.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Check the rotor side first, since this one is made for the left side only and a right-side rotor will not seat on it. Make sure the 2.836 Inch center hole and 5 x 4.50 Inch bolt pattern match the hub before tightening anything.
What’s included
A single 1-piece left replacement rotor with a plain finish.
Not included: The rotor is supplied alone, so you will need to source the pads, calipers and mounting parts yourself.
