Overview
The Baer Brakes 6910333 is a 1-piece slotted replacement brake rotor for the left side of select Baer Brake systems. It measures 12.000 Inch across and 1.100 Inch thick, uses a 5 x 4.50 Inch bolt pattern and has a tall hat design, which suits owners replacing a left-side rotor on a compatible Baer setup.
Baer Brakes casts the rotor from cast iron in full cast, one-piece construction. The rotor is directional, meaning the friction surface is made for one side only, so each entry covers a single left rotor and the right-side rotor is sold under its own part number.
Key features
- Slotted surface finish.
- Curved vane design, which Baer Brakes says provides optimum cooling.
- Dynamic balanced for vibration-free performance.
- Purpose built castings that the brand describes as made from premium materials.
- Directional design matched to the left hub only.
- Tall hat design with a 2.781 Inch center hole.
Before you buy
A brake rotor works together with the pads and caliper as a set. When the rotor is replaced, check pad thickness and caliper slide movement so the new friction surface seats evenly. Rotors wear along the friction face, and a worn surface can cause pulsation under braking, while a lipped edge at the hat can make a new pad wear unevenly.
Tall hat rotors place the friction face further from the hub, so the hub face and hat contact area should be clean and flat before mounting. Surface rust on the hat can be removed with a wire brush, and seized hardware should be replaced rather than forced. Directional rotors need their friction side oriented correctly on each side of the vehicle.
- Measure pad thickness before fitting a new rotor
- Clean the hub face and hat contact area
- Replace seized hardware instead of forcing it
Specifications
| Brand | Baer Brakes |
|---|---|
| Part number | 6910333 |
| UPC | 90127961100 |
| Axle side | Left |
| Rotor type | 1-piece, full cast, vented |
| Surface type | Slotted |
| Directional brake surface | Yes |
| Outside diameter | 12.000 Inch |
| Nominal thickness | 1.100 Inch |
| Center hole diameter | 2.781 Inch |
| Stud/lug hole circle diameter | 4.50 Inch |
| Stud/lug hole quantity | 5 |
| Overall height | 2.228 |
| Material | Cast iron |
| Grade type | Performance |
| Drum in hat | No |
| ABS tone ring included | No |
| Emission code | 6 |
| Country of origin | USA |
Vehicle fitment
It is a replacement rotor for select Baer Brake systems. Confirm fit for your vehicle’s year, model and trim before ordering.
Confirm your vehicle’s year, model and trim before ordering. Check Baer Brakes’ specifications for the Baer system this rotor is designed to replace.
Installation notes
Fit this rotor only on the left hub, because it is directional. Compare the 5 x 4.50 Inch bolt pattern and 2.781 Inch center hole with your hub before mounting. Work on brakes only with the vehicle supported securely on stands, never on a jack alone.
What’s included
One 1-piece slotted replacement rotor for the left side.
Not included: the ABS tone ring and the right-side rotor.
