Overview
The Baer Brakes EradiSpeed Plus 2301028 is a two-piece front rotor upgrade for 1999-2004 Chevrolet Silverado 1500 and GMC Sierra 1500 trucks, and for 2000-2006 Chevrolet Suburban 1500, Chevrolet Tahoe, GMC Yukon and GMC Yukon XL 1500 SUVs. Each unit pairs a purpose-cast rotor, larger than stock, with a black anodized 6061-T6 aluminum hat, which Baer positions as a direct replacement for the factory rotors.
The EradiSpeed Plus adds increased mass in the friction area for better heat absorption, and its curved vane design maximizes airflow for better heat dissipation. The rotor is built to outperform the factory units it replaces, and the slotted, drilled and zinc-plated surface gives a cleaner look behind the wheel.
Key features
- Larger than stock rotor with a 14 inch rotor diameter, for increased brake torque and reduced stopping distance
- Two-piece design: cast iron rotor mounted to a black anodized 6061-T6 billet aluminum hat
- Purpose-cast with increased mass in the friction area for better heat absorption
- Directional, curved vane design to maximize airflow for better heat dissipation
- NAS stainless high-grade hardware
- Slotted, drilled and zinc-plated rotor surface that adds visual appeal
- Caliper anchor relocation brackets included to reposition the caliper on the larger rotor
Rotor wear and replacement
Front rotors wear through repeated braking, and the friction surface gradually loses thickness and flatness. Common signs include pulsation through the pedal, vibration under light braking, scoring or grooves across the face, and a lip at the outer edge. Measure thickness against the minimum stamped on the rotor or in the service data for your vehicle before deciding whether to replace. Rotors and pads are often replaced together so the new friction material beds onto a matching surface.
When a larger rotor is fitted, the pads, bracket hardware and wheel clearance should be checked as a group. Brake lines and ABS sensor wiring should be inspected for stretch or wear near the caliper, since the caliper position changes. After installation, bed in the pads with several moderate stops before heavy use.
- Check pad thickness and replace as a set with the rotors
- Inspect caliper slides and boots for free movement
- Re-check lug nut torque after the first few drives
Specifications
| Brand | Baer Brakes |
|---|---|
| Part number | 2301028 |
| UPC | 844165004295 |
| Package | Set |
| Axle | Front |
| Drive | 2WD, 4WD |
| Construction | Two piece |
| Rotor material | Cast iron |
| Rotor diameter | 14 inch |
| Hat material | Black anodized 6061-T6 aluminum |
| Hardware | NAS aircraft grade, stainless |
| Surface | Slotted, drilled and zinc plated |
| Brake surface | Directional, vented |
| Nominal thickness | 1.15 |
| Minimum wheel diameter | 18.0 inch |
| Template | Z077P |
| Rust resistant coating | Yes |
| ABS tone ring included | No |
| Grade | Performance |
| Country of origin | US |
Vehicle fitment
It fits the front position on these vehicles:
- 1999-2004 Chevrolet Silverado 1500
- 2000-2006 Chevrolet Suburban 1500
- 2000-2006 Chevrolet Tahoe
- 1999-2004 GMC Sierra 1500
- 2000-2006 GMC Yukon
- 2000-2006 GMC Yukon XL 1500
Not covered: Cadillac Escalade, which is not on this list, and 2005-2006 Silverado or Sierra 1500 models. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The included caliper anchor relocation brackets reposition the caliper for the larger rotor. It is a direct bolt-on with no brake bleeding required. Check wheel clearance with template Z077P, including the spare, since fit into every wheel style cannot be guaranteed.
What’s included
Two-piece rotor assemblies sold as a set, with caliper anchor relocation brackets. NAS stainless hardware is part of the kit.












