Overview
The Baer Brakes 6910868 is a left-side 14 inch slotted, drilled and zinc-plated replacement brake rotor for select Baer Brake systems, including the ES+1 and AlumaSport systems. It is a one-piece vented cast iron rotor with a 6 x 5.50 inch bolt pattern and a 3.095 inch center bore, sold as each.
Because this rotor is directional, it is made specifically for the left side of the vehicle. A right-side rotor is a separate part and must be ordered on its own. Baer built the casting from premium materials for rotor stability and resistance to distortion, and the rotor is dynamically balanced for vibration-free performance.
Key features
- Purpose-built full cast, one-piece construction from premium materials
- Curved vane design for optimum cooling
- Designed for rotor stability and resistance against distortion
- Dynamically balanced for vibration-free performance
- Slotted, drilled and zinc-plated braking surface
- Directional brake surface for left-side installation
Planning the left-side job
A directional left rotor is only half of an axle set, so plan the right side at the same time. Mixing a new left rotor with a worn right rotor can leave braking uneven, so inspect both sides and replace them together when wear differs. Consider the pads, calipers and hardware as well, since new pads bedding onto a rotor with old hardware may not stop as expected.
The ABS tone ring is separate on this item. If your hub uses a tone ring, check that the existing one is intact and seated before reassembly, because a damaged ring can affect wheel-speed signals. Thick cast rotors carry heat well during repeated stops, but the system should still be allowed to cool after installation before hard use.
- Inspect the wheel bearing and hub face before mounting
- Clean rust from the hat contact surface
Specifications
| Brand | Baer Brakes |
|---|---|
| Part number | 6910868 |
| UPC | 844165035299 |
| Rotor type | Vented, one-piece full cast |
| Outside diameter | 14 inch (14.000 inch) |
| Nominal thickness | 1.15 inch |
| Overall height | 2.309 inch |
| Stud/lug hole quantity | 6 |
| Stud/lug hole circle diameter | 5.50 inch |
| Center hole diameter | 3.095 inch |
| Axle side | Left |
| Brake surface | Directional |
| Material | Cast iron |
| Surface type | Slotted, drilled and zinc-plated |
| Grade type | Performance |
| Emission code | 6 |
| Drum in hat | No |
| ABS tone ring included | No |
| Sold as | Each |
| Country of origin | CN |
Vehicle fitment
It is made for select Baer Brake systems, including the ES+1 and AlumaSport systems. Match the rotor to your vehicle’s year, model and trim before ordering, and check it against your brake system before installation.
This rotor is a Baer system replacement and is not a general-purpose rotor for other brake setups. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The rotor is directional and side-specific, so match the left rotor to the left hub only. Because rotors are sold individually, a matching right-side rotor is needed for a pair. The ABS tone ring is not included with this rotor. Brake work affects stopping performance, so have the rotor and pads checked after installation.
What’s included
One left-side replacement brake rotor, sold as each.
Not included: A right-side rotor and an ABS tone ring.












