Overview
The Baer Brakes 6920797 is a one-piece replacement brake rotor for the right side, with a slotted face and a 13.250 inch outside diameter. Select Baer Brake systems are the stated application, and the full dimensions appear in the specifications table below.
Slotted replacement rotors give the pad face a grooved surface, which is the finish this part carries. The rotor is directional and handed, so it should be mounted on the right side only. Each rotor is supplied on its own, so an axle pair takes two separate rotors.
Key features
- One-piece full cast construction
- Curved vane design aimed at cooling
- Dynamically balanced for vibration-free running
- Stated by Baer Brakes to resist distortion through rotor stability
- Slotted surface finish
- Non-vented, directional brake surface
- Cast iron, performance grade
Mounting and hub preparation
Directional rotors have a defined side, so confirm the right-side marking before fitting. Clean the hub face and the pilot area with a wire brush so the rotor sits flat, and check for burrs or rust that could cause runout. A slotted friction face benefits from the same clean surface, because debris trapped in the grooves can scratch pads on the first stops.
Rotors are supplied one at a time, so a matched pair means ordering two. Without an ABS tone ring in the box, wheel speed sensing has to come from the existing hub hardware or a separate setup, so inspect the sensor and its gap before assembling. Have a technician check lug torque and road-test the vehicle at low speed before normal use.
- Clean the hub face and pilot before mounting
- Check that the right-side marking matches the axle
- Inspect the wheel speed sensor and its gap
- Re-check lug torque after the first drive
Specifications
| Brand | Baer Brakes |
|---|---|
| Part number | 6920797 |
| UPC | 90127962039 |
| Axle position | Right |
| Construction | Full cast, one piece |
| Rotor type | Non-vented |
| Brake surface | Directional |
| Surface type | Slotted |
| Material | Cast iron |
| Grade | Performance |
| Outside diameter | 13.250 inch |
| Nominal thickness | .550 inch |
| Overall height | 1.967 |
| Center hole diameter | 2.783 inch |
| Stud/lug hole circle diameter | 4.50 inch |
| Stud/lug hole quantity | 5 |
| Emission code | 6 |
| ABS tone ring included | No |
| Drum in hat | No |
| Sold as | Each |
| Country of origin | USA |
Vehicle fitment
The 6920797 is built for select Baer Brake systems. Verify the makes, models and years that match your vehicle before ordering.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Fit the rotor to the right side only, since its directional design is handed. The specifications state there is no ABS tone ring with this rotor, so plan how your hub’s wheel speed sensing will be handled. Match the 2.783 inch center hole and the 5-lug, 4.50 inch bolt circle to the hub before mounting.
What’s included
One right-side rotor, sold as each.
Not included: ABS tone ring.
