Overview
The Baer Brakes 6929094 is a plain-finish, right-side replacement brake rotor with a 12.000 inch diameter, 1.020 inch thickness and one-piece full cast iron construction. It is a vented, directional rotor built for select Baer Brake systems, so it belongs on the right side only.
Plain rotors leave the friction surface free of slots or drilled holes. For owners replacing a worn right-side disc in a compatible system, this part number offers a five-stud pattern on a 4.75 inch circle with a 2.810 inch register. The table below gives the full set of values, so compare them with your hub.
Key features
- Plain surface finish with no slots or drilled holes
- Purpose built castings manufactured from premium materials
- Curved vane design for cooling
- Engineered for rotor stability and resistance to distortion
- Dynamic balanced for smooth running
- Directional surface specific to the right side
Plain rotors and daily driving
A plain friction surface is a simple, consistent face for everyday street use. It gives the pads an even contact area and avoids the edges that slotted or drilled faces create. Good results depend on clean mounting surfaces and pads that are bedded in properly after the rotor is fitted.
Before fitting, clean the hub face and mounting surface so the rotor sits flat. Confirm the directional marking matches the right side, and replace the pads at the same time for even contact. Inspect the wheel bearing for play, since looseness can cause uneven wear on any rotor.
- Clean the hub face and mounting surface
- Confirm the directional marking matches the right side
- Replace pads at the same time for even contact
Specifications
| Brand | Baer Brakes |
|---|---|
| Part number | 6929094 |
| UPC | 90127962237 |
| Side | Right |
| Construction | Full cast, one piece |
| Material | Cast iron |
| Outside diameter | 12.000 inch |
| Nominal thickness | 1.020 inch |
| Overall height | 2.406 |
| Solid or vented | Vented |
| Brake surface | Directional |
| Surface type | Plain |
| Stud/lug hole quantity | 5 |
| Stud/lug hole circle diameter | 4.75 inch |
| Center hole diameter (register) | 2.810 inch |
| ABS tone ring included | No |
| Drum in hat | Yes |
| Grade type | Performance |
| Emission code | 6 |
| Country of origin | USA |
| Quantity | 1 rotor |
Vehicle fitment
It is intended for the right side of select Baer systems. Compare your year, model and trim against the Baer system before buying.
The rotor is made for the right side only, so a left-side hub is not a match. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The directional design makes this rotor a right-side part, so do not force a left-side match. Brake work should be done by a qualified technician, who should also test the brakes before the vehicle is driven.
What’s included
One plain-finish, 1-piece replacement rotor for the right side, part number 6929094.
