Overview
The Baer Brakes 6920297 is a right-side, 2-piece replacement brake rotor with a slotted finish, made for select Baer Brake systems. Its vented cast iron ring measures 13.15 inches outside diameter and 1.25 inches nominal thickness, and each listing covers one rotor.
The rotors are directional and tied to one side of the vehicle, so this right-hand unit belongs only on the right. The braking surface is slotted, with no drilling and no zinc plating. It is a purpose-built casting with a curved vane design for cooling and is dynamic balanced for vibration-free running.
Key features
- Right-side, directional rotor ring
- Two-piece construction with 12 mounting holes on a 7.625 inch bolt circle
- Slotted braking surface
- Curved vane design, described by Baer as optimum cooling
- Designed for rotor stability and resistance to distortion
- Dynamic balanced for vibration-free performance
- Purpose-built castings from premium materials
Choosing the right setup
Slotted rotors are often chosen for the way they shed water, debris and pad dust from the braking face. The slots give the pad a fresh edge, which can help with consistent bite after repeated stops. They do not change the rotor’s size or fit, so the bolt pattern and hub match still come first when comparing parts.
When replacing a slotted ring, look at the pads it will meet. Harder compounds can wear a slotted face faster, while softer pads may leave more dust. Inspect the braking surface for deep grooves, heat cracks or a lip at the outer edge, since any of these signs suggest the ring is due for replacement. Clean the hub face and remove any rust before mounting so the rotor seats flat.
After installation, follow the pad installer’s bedding steps and avoid hard stops for the first several miles. Check the wheel bolts again after a short drive. A qualified technician should confirm hub fit before the vehicle returns to service.
Specifications
| Brand | Baer Brakes |
|---|---|
| Part number | 6920297 |
| UPC | 90127961902 |
| Axle position | Right |
| Construction | Two piece |
| Rotor type | Vented |
| Brake surface | Directional |
| Outside diameter | 13.15 in |
| Nominal thickness | 1.25 in |
| Bolt hole quantity | 12 |
| Bolt hole circle diameter | 7.625 in |
| Surface type | Slotted |
| Material | Cast iron |
| Grade type | Performance |
| ABS tone ring included | No |
| Emission code | 6 |
| Country of origin | USA |
| Sold as | Each |
Vehicle fitment
It is made for select Baer Brake systems. Look up the matching Baer system and vehicle before relying on this rotor for a particular truck or car.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Confirm right-side placement before the hub is reassembled, since the ring is not interchangeable with the left. The ABS tone ring is not supplied, so check whether your setup needs one. A qualified technician should verify hub fit and wheel clearance before the vehicle returns to the road.
What’s included
One right-side, 2-piece slotted replacement rotor ring, sold individually.
Not included: ABS tone ring.
