Overview
The Baer Brakes 6910987 is a 1-piece, left-side tall hat replacement brake rotor with a plain friction surface, a 13.000 inch outside diameter and a 0.810 inch nominal thickness. It is a vented cast iron rotor with no drum in the hat, offered for select Baer Brake systems.
The surface is plain, with no slotting or drilling. The castings are full cast, one piece, and the curved vane design is meant for cooling. The rotor is dynamically balanced and directional, so it is made for the left side only. Confirm fit for your vehicle’s year, model and trim before ordering.
Key features
- Plain friction surface
- Curved vane design intended for cooling
- Dynamically balanced for smooth running
- Full cast, one-piece cast iron body
- Vented, directional, left-side rotor
- Five-lug pattern on a 4.75 inch bolt circle
- Tall hat style with no drum in the hat
Before you buy
A replacement rotor should match the brake system it will run in. Measure the existing rotor’s outside diameter, thickness, hat style and lug pattern, then compare them with the listed specifications before ordering. Matching the hat style matters because a tall hat rotor changes how the wheel and caliper clear the assembly.
Rotors wear unevenly over time, so check both sides of a pair when one fails. A worn rotor often shows a lip at the edge, uneven thickness, or heat marks. Replacing a single side can leave the braking feel mismatched, so many owners replace the pair together and refresh the pads at the same time.
- Confirm the brake system before buying
- Check thickness against the minimum stamped on the old rotor
- Replace pads and hardware together when the rotor is changed
Specifications
| Brand | Baer Brakes |
|---|---|
| Part number | 6910987 |
| UPC | 844165035626 |
| Outside diameter | 13.000 inch |
| Nominal thickness | 0.810 inch |
| Register diameter | 2.780 inch |
| Stud/lug hole circle diameter | 4.75 inch |
| Stud/lug hole quantity | 5 |
| Material | Cast iron |
| Construction | Full cast, one piece |
| Rotor type | Vented |
| Surface type | Plain |
| Axle | Left |
| Brake surface | Directional |
| Drum in hat | No |
| ABS tone ring included | No |
| Emission code | 6 |
| Country of origin | USA |
| Sold as | Each |
Vehicle fitment
This rotor is tied to select Baer Brake systems, so the brake system determines the application. Confirm fit for your vehicle’s year, model and trim before ordering.
This plain left tall hat rotor is not a universal part and should not be assumed to suit every five-lug vehicle. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The rotor is directional and specific to the left side, so verify the side before mounting it. Its plain surface has no slots or drilled holes, which matters if you are matching it to an existing rotor.
What’s included
One left-side tall hat replacement rotor, sold as Each.
Not included: the right-side rotor, which is sold on its own.
