Overview
The Baer Brakes 6919096 is a left-side, 1-piece slotted replacement brake rotor with a 12.000 inch outside diameter, designed for select Baer Brake systems. It is a full cast iron, vented rotor with a drum in hat design, sold individually.
It is a performance-grade replacement rotor with a directional surface, made for the left side of the vehicle only. Confirm the match against your Baer system before ordering.
Key features
- Full cast, one-piece construction in cast iron
- Curved vane design for optimum cooling
- Slotted surface finish for the replacement rotor face
- Dynamic balanced for vibration-free running
- Directional design specific to the left side
- Drum in hat design
Choosing the right setup
Slots on a rotor face give pad debris and gas a path away from the friction surface. That can help keep pad contact consistent, though pad compound, driving habits and installation quality affect noise and wear as much as the surface pattern does. A slotted face is a common choice for daily driving and light off-road use.
When choosing a replacement, match the rotor side, bolt pattern and center hole first, then consider how the vehicle is used. Heavier loads and frequent hard stops put more heat into the rotor, so pad choice and cooling airflow become more important. Brake fluid and caliper condition matter too, since a sticking caliper can overheat a new rotor quickly.
- Look for pad material that suits your driving style.
- Check that caliper slides move freely before installation.
- Replace the rotor when the friction surface shows heavy scoring.
Specifications
| Brand | Baer Brakes |
|---|---|
| Part number | 6919096 |
| UPC | 90127961391 |
| Sold as | Each |
| Country of origin | USA |
| Axle side | Left |
| Construction | Full cast, one piece |
| Material | Cast iron |
| Solid or vented | Vented |
| Directional or non-directional brake surface | Directional |
| Surface type | Slotted |
| Grade type | Performance |
| Outside diameter | 12.000 in |
| Nominal thickness | 1.020 in |
| Overall height | 2.406 in |
| Center hole diameter | 2.81 in |
| Stud/lug hole quantity | 5 |
| Stud/lug hole circle diameter | 4.75 in |
| Drum in hat | Yes |
| ABS tone ring included | No |
| Emission code | 6 |
Vehicle fitment
This rotor is a replacement for select Baer Brake systems. Match the side, bolt pattern and center hole to your Baer system before fitting it.
Make sure your year, model and trim match before ordering. If the fit is uncertain, compare your hub measurements with the specifications above.
Installation notes
Because the rotor is directional, install it only on the left side; the right-side rotor is a separate part. Check that the 2.81 inch center hole and 5 x 4.75 inch bolt pattern match your hub before mounting the rotor.
What’s included
One left-side replacement rotor, 1-piece slotted finish, sold individually.
Not included: the right-side rotor and any other brake system components.
