Overview
The Baer Brakes 6920986 is a right-side replacement brake rotor measuring 13.000 inch in diameter and .810 inch thick. It is a 1-piece short hat rotor with a slotted, drilled and zinc-plated surface, made for select Baer Brake systems. The rotor is directional, so it belongs on the right side of the vehicle only.
This vented cast iron rotor is built as a performance grade part. Its curved vane design is meant to improve cooling, and the casting is engineered for rotor stability and resistance to distortion. Each rotor is dynamic balanced for vibration-free running. Rotors are sold individually, so a complete axle needs one right and one left part.
Key features
- Right-side, directional rotor for the right hub
- Curved vane design for cooling
- Engineered for rotor stability and resistance against distortion
- Dynamic balanced for vibration-free performance
- Slotted, drilled and zinc-plated surface
- Full cast, one-piece construction in cast iron
Before you buy
Brake rotors wear with every stop. Over time the friction surface loses thickness, the hat can develop cracks near the bolt holes, and heat can leave blue or uneven patches on the face. Any of these signs means the rotor should be measured against its minimum thickness and replaced if it falls below that limit. Pads should be checked at the same time, since worn pads are often the cause of rotor damage. Replacing pads and rotors together keeps the braking surfaces matched.
When choosing a rotor, the mounting pattern, center bore and hat height must match the hub. Directional rotors also need correct orientation, so keep the marking facing the direction of wheel rotation as the part goes on. Many drivers replace the hub bolts and wheel studs when a rotor is changed, and they clean any rust from the hub face before setting the new rotor in place.
- Check rotor thickness with a micrometer before installation
- Clean the hub mounting surface to remove rust
- Use fresh pads and proper torque on the lug nuts
Specifications
| Brand | Baer Brakes |
|---|---|
| Part number | 6920986 |
| UPC | 844165037736 |
| Axle position | Right |
| Rotor type | Vented, directional |
| Construction | Full cast, one piece |
| Material | Cast iron |
| Outside diameter | 13.000 inch |
| Nominal thickness | .810 inch |
| Overall height | 2 |
| Stud/lug hole quantity | 5 |
| Stud/lug hole circle diameter | 4.50 inch |
| Center hole diameter | 2.780 inch |
| Hat style | Short hat |
| Surface type | Slotted, drilled and zinc plated |
| Grade type | Performance |
| Drum in hat | No |
| ABS tone ring included | No |
| Emission code | 6 |
| Sold as | Each |
| Country of origin | USA |
Vehicle fitment
It is made for select Baer Brake systems. Confirm your vehicle’s year, model and trim before ordering.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Because the rotor is directional and marked for one side, fit this right-side part only on the right hub. Use a separate left-side rotor on the left. Since the ABS tone ring is not included, plan that component separately. Brake parts affect stopping, so have the installation checked and test the brakes at low speed before regular driving.
What’s included
One replacement rotor, right side, with a slotted, drilled and zinc-plated surface, sold as each.
Not included: ABS tone ring (ABS Tone Ring Included: No) and any left-side rotor, which is sold individually.
