Overview
The Baer Brakes 6920526 is a right-side, one-piece full cast replacement brake rotor with a slotted, drilled and zinc-plated surface, made for select Baer Brake systems. Its listed dimensions are 14 inches outside diameter and 0.799 inch nominal thickness, with a 3.094 inch center hole and six lug holes on a 5.50 inch circle.
This version is listed with a drum in hat, which means it combines a drum section with the rotor hat, and it has an overall height of 3.366 inches. Baer Brakes describes curved vanes for cooling and a dynamically balanced casting. Because the rotor is directional, install it only on the right side of the vehicle.
Key features
- One-piece full cast construction
- Slotted, drilled and zinc-plated friction surface
- Drum in hat design
- Vented, with curved vanes for cooling
- Dynamically balanced for vibration-free running
- Directional rotor for the right side only
Drum in hat rotors explained
A drum in hat rotor combines a disc friction surface with a drum section built into the hat, so one part serves both the disc braking and the drum braking functions. The drum portion uses its own shoes, springs and adjuster, and these wear separately from the disc surfaces.
Because the hub and hat are one casting, wear in one area can affect the other. Check the drum braking surface for scoring, the shoes for lining wear and the hub for corrosion before mounting. Keep the drum section clean and keep oil and brake fluid away from the friction faces.
- Inspect drum shoes alongside the disc surface
- Clean the hub mating face before mounting
- Replace shoe hardware when linings are worn
- Verify parking brake operation after fitting
Specifications
| Brand | Baer Brakes |
|---|---|
| Part number | 6920526 |
| UPC | 844165049883 |
| Construction | Full cast, one piece |
| Material | Cast iron |
| Outside diameter | 14 in |
| Nominal thickness | 0.799 in |
| Overall height | 3.366 in |
| Center hole diameter | 3.094 in |
| Stud/lug hole quantity | 6 |
| Stud/lug hole circle diameter | 5.50 in |
| Drum in hat | Yes |
| Surface type | Slotted, drilled and zinc plated |
| Rotor style | Vented |
| Brake surface | Directional |
| Axle | Right |
| Grade type | Performance |
| Emission code | 6 |
| ABS tone ring included | No |
| Country of origin | USA |
| Sold as | Each |
Vehicle fitment
Not included with this part:
This is a right-side, one-piece rotor; left-side parts, other Baer systems and hub hardware are separate. Check the specifications for your bolt pattern and brake system before ordering. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Measure your hub’s six-lug pattern on a 5.50 inch circle and confirm the 3.094 inch center hole suits it before mounting. Because the hat carries a drum section, have a technician confirm both service brake and drum operation after installation.
What’s included
The package is one right-side, one-piece rotor.
Not included: Brake pads, the left-side rotor and any hub hardware.
