Overview
The Baer Brakes 6919205 is a 1-piece left-side replacement brake rotor with a slotted surface, 12.440 inch outside diameter and 0.477 inch nominal thickness, made for select Baer Brake systems. It is a directional, non-vented cast iron rotor intended for the left hub, so confirm the side before fitting it.
The full mounting data is in the table below, including 5 lugs on a 5.0 inch bolt circle and a 2.84 inch center hole. The surface type is slotted only, with no drilling or zinc plating. The castings are cast iron with a curved vane design for cooling and dynamic balancing for smooth running.
Key features
- Slotted surface finish on the rotor face
- Curved vane design that Baer Brakes says aids optimum cooling
- Directional left-side rotor noted as specific to one side of the vehicle
- Full cast, one-piece construction in cast iron
- Dynamic balanced for vibration-free running
- Non-vented rotor with a drum in hat design
Choosing slotted rotors
Slots cut into the friction face give pads a channel for gas, dust and water to escape during braking. That can help keep the contact surface cleaner, which many drivers look for when they brake hard or drive in wet conditions. The slots do not alter the mounting pattern, so fit still depends on the hub and brake system.
Slotted rotors work best with pads designed for them, since some compounds wear faster against grooved faces. Choose pads rated for the expected use and avoid pairing a low-quality pad with a heavily worn rotor. Inspect the slot edges for cracking and check that the face stays flat as the rotor wears.
- Match the pad compound to your driving style
- Inspect slot edges for cracking
- Replace pads and rotors together where possible
- Keep the hub face clean and free of rust before fitting
Specifications
| Brand | Baer Brakes |
|---|---|
| Part number | 6919205 |
| UPC | 90127961520 |
| Axle position | Left |
| Outside diameter | 12.440 inch |
| Nominal thickness | 0.477 inch |
| Overall height | 3.01 inch |
| Center hole diameter | 2.84 inch (register 2.840 inch) |
| Stud/lug hole quantity | 5 |
| Stud/lug hole circle diameter | 5.0 inch |
| Material | Cast iron |
| Construction | Full cast, one piece |
| Surface type | Slotted |
| Rotor type | Non-vented |
| Brake surface | Directional |
| Drum in hat | Yes |
| ABS tone ring included | No |
| Grade type | Performance |
| Emission code | 6 |
| Country of origin | USA |
Vehicle fitment
This rotor is made for select Baer Brake systems, so the brake system rather than a standard vehicle chassis determines whether it is correct. Check your vehicle’s year, model and trim against that brake system before buying.
A left-side rotor will not suit the right hub, and the 5-lug, 5.0 inch bolt circle must match your hub. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Confirm the left axle position against the hub you are servicing, since the directional brake surface only works in one orientation. Hub and bearing preparation is part of the brake job, so follow your service procedure and have a technician complete the installation.
What’s included
Includes one left-side replacement rotor.
Not included: The ABS tone ring is not included. Hub, bearings, caliper and pads are separate parts that this rotor does not provide.
