Overview
The Baer Brakes 6910138 is a left-side, two-piece replacement brake rotor ring for certain Baer Pro Plus and other Baer brake systems. It is a 13-inch vented rotor with a slotted and drilled friction surface and a zinc-plated finish. It is also made for use in the Baer TRACK+ system.
The rotor uses a two-piece construction and is made from cast iron. Its curved vane design aids cooling, and it is dynamically balanced for vibration-free performance. Confirm your vehicle’s year, model and trim before ordering.
Key features
- Two-piece rotor ring construction
- Slotted, drilled and zinc-plated friction surface
- Curved vane design for cooling
- Dynamic balanced for vibration-free performance
- Directional brake surface for the left side
- 12 mounting bolt holes on an 8.5-inch circle
- Performance grade type
Two-piece rotor ring basics
A two-piece rotor separates the friction ring from the hat, so the ring can be replaced without replacing the full hub assembly. The ring is held to the hat by fasteners, and those fasteners should be checked for tightness and corrosion whenever the ring is removed. Clean the hat’s mounting face before installing a new ring so it sits flat.
Two-piece rings are often chosen for performance use because the ring can be serviced separately from the hat. When choosing a ring, match the mounting bolt pattern and the directional side before ordering, and confirm the ring matches the rest of the braking system, including pads and calipers.
- Check ring-to-hat fasteners for wear before reassembly
- Keep the directional side marked during removal
- Bed in new pads after the ring is installed
Specifications
| Brand | Baer Brakes |
|---|---|
| Part number | 6910138 |
| UPC | 844165011972 |
| Sold as | Each |
| Construction | Two piece |
| Material | Cast iron |
| Finish | Zinc plated |
| Surface type | Slotted, drilled and zinc plated |
| Axle | Left |
| Solid or vented type | Vented |
| Brake surface | Directional |
| Outside diameter | 13 inches |
| Nominal thickness | 1.1 inches |
| Mounting bolt hole circle diameter | 8.5 inches |
| Mounting bolt hole quantity | 12 |
| Grade type | Performance |
| ABS tone ring included | No |
| Emission code | 6 |
| Country of origin | CN |
Vehicle fitment
It fits certain Baer Pro Plus and other Baer brake systems and the TRACK+ system. Confirm your vehicle’s year, model and trim before ordering.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Its brake surface runs one direction only, so verify the left-side orientation before fitting the ring. The ABS tone ring is not included, so check whether your system uses one before assembly.
What’s included
One rotor ring, sold individually.
Not included: ABS tone ring.













