Overview
The Baer Brakes 6929166 is a right-side, slotted, 1-piece tall hat replacement brake rotor measuring 13.000 inch across and 1.100 inch thick. It is used in certain Baer Track4, SS4 and other Baer Brake systems and is sold as each.
Because the rotor is directional, the right and left sides are different parts, and this one is made for the right side only. The full cast, one-piece casting is vented and built from cast iron, with the vented friction ring cast in the same piece as the hat that bolts to the hub.
Key features
- Slotted surface finish on the friction face
- Curved vane design intended to help cooling
- Vented, full cast, one-piece construction
- Engineered for rotor stability and resistance to distortion
- Dynamically balanced for vibration-free performance
- Tall hat with a 5 x 5.00 inch, five-stud lug pattern
Before you buy
Brake rotors work with the pads, calipers and hub as one system. When a rotor is replaced, the friction surface must meet the pads evenly, and the hat must sit flat against the hub face so the rotor runs true. A tall hat changes how the rotor clears the caliper bracket and the wheel, so check clearance during assembly rather than assuming it will line up with the old part.
Slotted friction faces help clear debris and gas from the pad surface, but they can wear pads differently than plain faces. Pads and rotors are often replaced together, and new pads should be bedded in with a gradual series of stops. Inspect the braking surface for deep grooves, cracks, heat checking or a lip at the outer edge, and measure thickness against the minimum marked on the rotor before reuse.
- Check the hub face for rust or debris before mounting
- Replace wheel bearings if play is felt at the wheel
- Torque lug nuts in a star pattern
- Inspect caliper slide pins during the job
Specifications
| Brand | Baer Brakes |
|---|---|
| Part number | 6929166 |
| UPC | 90127962329 |
| Axle side | Right |
| Outside diameter | 13.000 inch |
| Nominal thickness | 1.100 inch |
| Overall height | 2.232 |
| Stud/lug hole quantity | 5 |
| Stud/lug hole circle diameter | 5.00 inch |
| Register diameter | 2.781 inch |
| Center hole diameter | 3.089 |
| Material | Cast iron |
| Surface type | Slotted |
| Solid or vented | Vented |
| Construction | Full cast, one piece |
| Drum in hat | No |
| ABS tone ring included | No |
| Grade type | Performance |
| Emission code | 6 |
| Brake surface | Directional |
| Sold as | Each |
| Country of origin | USA |
Vehicle fitment
Fit depends on your vehicle’s year, model and trim, so verify those before ordering. Match the 5 x 5.00 inch bolt pattern, the 2.781 inch register and the right-side orientation to your hub and Baer brake system.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The rotor is directional and must go on the right side of the hub. Brake rotors affect stopping performance, so have the pads, calipers and hub checked during installation.
What’s included
One replacement rotor, sold as each.
Not included: the left-side rotor, brake pads and hub hardware are not part of this item. Rotors are sold individually.
