Overview
The Baer Brakes 6920319 is a 1-piece plain finish replacement brake rotor for the right side of select Baer Brake systems. It is a vented, full cast iron rotor with a short hat, 12 inches in outside diameter and a 1.1 inch nominal thickness. The rotor is directional, so it is made for one side of the vehicle only.
Baer builds the rotor from purpose-built castings and premium materials. Its curved vane design is intended for optimum cooling, and each rotor is dynamically balanced for vibration-free performance. Anyone replacing a right-hand rotor will find the hub dimensions in the specifications table below.
Key features
- Curved vane design intended for optimum cooling
- Full cast, one-piece construction with a short hat
- Directional rotor made for the right side only
- Dynamically balanced for vibration-free performance
- Plain friction surface with no slots or drilled holes
- Cast iron material in a Performance grade
- The design is intended to support rotor stability and resist distortion.
Before you buy
Brake rotors wear over time from friction. The braking surface can gradually thin and develop grooves, heat cracks or a raised lip at the outer edge. A worn rotor can cause pulsing through the brake pedal, longer stopping distances and uneven pad wear. When one rotor is replaced, many owners replace the opposite side of the same axle as well so braking stays balanced.
Pads, calipers and hub components are often inspected at the same time as the rotor. Check the hub face and bolt holes for rust or damage, and clean the mounting surface so the new rotor sits flat. Because this rotor is directional, verify the right-side position before tightening anything, and confirm the hub is compatible with the Baer system you are working on.
- Inspect pads and hardware when the rotor is changed
- Clean rust from the hub face before mounting
- Tighten lug nuts in a star pattern after fitting
- Re-check lug nut tightness after the first few drives
Specifications
| Brand | Baer Brakes |
|---|---|
| Part number | 6920319 |
| UPC | 844165037064 |
| Construction | Full cast, one piece |
| Axle position | Right |
| Solid or vented | Vented |
| Surface type | Plain |
| Directional brake surface | Directional |
| Material | Cast iron |
| Grade type | Performance |
| Outside diameter | 12 in |
| Nominal thickness | 1.1 in |
| Overall height | 1.717 in |
| Center hole diameter | 2.799 in |
| Stud/lug hole quantity | 5 |
| Stud/lug hole circle diameter | 4.50 in |
| Drum in hat | No |
| ABS tone ring included | No |
| Emission code | 6 |
| Country of origin | USA |
| Sold as | Each |
Vehicle fitment
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Confirm the right axle position before mounting, since this rotor will not work on the left. The ABS tone ring is not included, so if your hub uses one, plan to reuse or source a ring before assembly.
What’s included
One Baer Brakes 6920319 right-side replacement rotor, sold individually.
Not included: The left-side partner rotor, brake pads, caliper assemblies and any ABS tone ring are separate purchases.
