Overview
The Baer Brakes 6910228 is a left-side, one-piece full cast replacement brake rotor measuring 14.000 inches in outside diameter and 1.181 inches thick, with six studs on a 5.50-inch circle. It is slotted, drilled and zinc plated, and it is made for the ES+1 and AlumaSport systems.
The rotor has a 3.098-inch center hole and a 3.764-inch overall height. It is directional, specific to the left side, and sold individually. No vehicle model, year or chassis code is given, so the Baer system determines compatibility.
Key features
- Full cast, one-piece construction
- Curved vane design for cooling
- Balanced for vibration-free performance
- Slotted, drilled and zinc-plated surface
- Directional braking surface for the left side
- Built for stability and resistance to distortion under braking.
Signs of rotor wear
A one-piece full cast rotor is a single casting, so the friction surface and hat area wear together. When the braking surface is worn or cracked, the whole rotor is replaced, not just the ring. Check the center hole and stud pattern against your hub before fitting, since a mismatch will cause vibration even when the rotor is otherwise sound.
Watch for pedal pulsation, a grinding noise or a visible lip at the edge of the braking surface. Heat checking across the face is common with hard use and is worth inspecting at every pad change. Clean the hub face thoroughly before mounting, because rust or debris left on the hub can cause the rotor to sit off true.
- Measure thickness against the minimum stamped on the old rotor
- Inspect the hat area for cracks
- Replace pads and rotors together
Specifications
| Brand | Baer Brakes |
|---|---|
| Part number | 6910228 |
| UPC | 844165034797 |
| Axle side | Left |
| Construction | Full cast, one piece |
| Outside diameter | 14 in |
| Nominal thickness | 1.181 in |
| Overall height | 3.764 in |
| Center hole diameter | 3.098 in |
| Stud/lug hole circle diameter | 5.5 in |
| Stud/lug hole quantity | 6 |
| Rotor type | Vented |
| Brake surface | Directional |
| Surface type | Slotted, drilled and zinc plated |
| Material | Cast iron |
| Grade type | Performance |
| Emission code | 6 |
| ABS tone ring included | No |
| Sold as | Each |
| Country of origin | CN |
Vehicle fitment
Fitment is tied to the Baer system, with ES+1 and AlumaSport as the system names. These names do not identify a specific year, model or chassis.
Installation notes
Mount the left rotor only, since the surface is directional. The 3.098-inch center hole and six-stud pattern need to match your hub. Stopping performance depends on correct installation, so a qualified technician should complete the work and test the brakes.
What’s included
One left-side one-piece full cast rotor, sold as each.
Not included: an ABS tone ring, since this rotor ring does not include one.












