Overview
The Baer Brakes 6929090 is a right-side, 1-piece slotted replacement brake rotor with a 12.000 inch outside diameter and a 1.020 inch nominal thickness. It is built as a service part for select Baer Brake systems and is sold individually, so replacing both sides takes two rotors. The rotor is cast iron, vented and directional, with a 2.780 inch center hole and a 5 x 4.50 inch / 5 x 4.75 inch bolt circle. Fit depends on the Baer system it serves.
The casting uses a curved vane pattern intended for cooling and rotor stability. The slotted surface is the defining feature, so compare it with the plain or drilled Baer versions and confirm the surface type you need before ordering.
Key features
- Full cast, one-piece construction in cast iron
- Curved vane design intended for optimum cooling
- Directional brake surface built for the right side only
- Dynamic balanced for vibration-free performance
- Slotted surface type on a vented rotor
- Drum in hat design with a performance grade type
Before you buy
Brake rotors work together with the pads, calipers and hub they are installed on, so the rotor is only one part of the braking system. Before buying a slotted rotor, look at the pad compound you plan to run. Some pads bed in more quickly against a grooved face, while others are chosen for quiet operation on pavement. Decide whether the rest of the system will be replaced at the same time.
Slots help clear debris and gas from the friction face, which many drivers value when braking hard or driving in wet conditions. Slotted faces also show wear differently than plain ones, so inspect the edges and groove depth at each pad change. Check runout and thickness with a gauge before reinstalling a used rotor.
- Match pad material to how the vehicle is driven
- Replace pads and rotors together when wear is uneven
- Inspect for cracks running out from the center hole
- Clean the hub mating surface before mounting
Specifications
| Brand | Baer Brakes |
|---|---|
| Part number | 6929090 |
| UPC | 90127962220 |
| Axle position | Right |
| Outside diameter | 12.000 in |
| Nominal thickness | 1.020 in |
| Overall height | 2.406 in |
| Center hole diameter | 2.780 in |
| Bolt pattern (stud/lug hole circle) | 5 x 4.50 in and 5 x 4.75 in |
| Stud/lug quantity | 5 |
| Material | Cast iron |
| Construction | Full cast, one piece |
| Rotor type | Vented |
| Brake surface | Directional |
| Surface type | Slotted |
| Drum in hat | Yes |
| ABS tone ring included | No |
| Grade type | Performance |
| Emission code | 6 |
| Country of origin | USA |
| Sold as | Each |
Vehicle fitment
It is a replacement rotor for select Baer Brake systems. Match the Baer system you own by right-side position, the 5 x 4.50 inch / 5 x 4.75 inch bolt circle and the 2.780 inch center hole. Confirm your vehicle’s year, model and trim before ordering.
Because no year or model is given, this rotor should not be assumed to match a stock hub or a Baer kit from another generation. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The rotor is directional and made for the right side, so it must go on the right side of the vehicle, and a left-side rotor is a separate purchase. Match the bolt pattern and 2.780 inch center hole to the hub before mounting, and check the Baer Brake system it is intended for. Brake rotors are safety-critical, so have the installation verified by a qualified technician.
What’s included
One right-side replacement rotor, sold as each.
Not included: the left-side rotor and the other components of the Baer Brake system.
