Overview
The Baer Brakes 6910336 is a left-side, one-piece tall hat replacement brake rotor with a slotted, drilled and zinc-plated surface, sold individually for select Baer Brake systems. It is a vented, full-cast cast iron rotor with a 12.000 inch outside diameter and a 1.100 inch nominal thickness.
The rotor stands 2.228 inch overall and has a 2.781 inch center hole, with five studs on a 4.5 inch bolt hole circle. Because the rotor is directional, it is made for the left axle position only. Confirm the Baer system it belongs to before ordering.
Key features
- One-piece full-cast tall hat construction
- Slotted and drilled face with a zinc-plated finish
- Vented rotor body
- Directional brake surface for the left side
- Cast from premium materials in a purpose-built form
- Balanced to run smoothly with minimal vibration
- Current engineering aimed at stability and resistance to distortion
- Curved vanes to help cooling
Hat height and hub fit
A tall hat raises the friction ring away from the hub, which changes how the rotor seats and how much room the caliper and wheel need. The center hole locates the rotor on the hub, while the bolt circle sets how the lug studs line up. If either fit is off, the rotor can run out, which shows up as pulsation under braking.
Before installing, clean the hub face and remove any rust or old debris that could hold the rotor off true. Check bolt seats and tighten the fasteners in a crisscross pattern. Road-test slowly after fitting and recheck the lug torque after the first few drives.
- Clean the hub face and register before mounting
- Check for runout with a dial indicator if pulsation appears
- Recheck lug torque after the first drives
Specifications
| Brand | Baer Brakes |
|---|---|
| Part number | 6910336 |
| UPC | 844165035169 |
| Construction | One-piece, full cast |
| Material | Cast iron |
| Surface type | Slotted, drilled and zinc plated |
| Rotor type | Vented |
| Brake surface | Directional |
| Axle position | Left |
| Hat style | Tall hat |
| Outside diameter | 12.000 inch |
| Nominal thickness | 1.100 inch |
| Overall height | 2.228 inch |
| Center hole diameter | 2.781 inch |
| Stud/lug hole circle diameter | 4.5 inch |
| Stud/lug hole quantity | 5 |
| Drum in hat | No |
| ABS tone ring included | No |
| Grade type | Performance |
| Emission code | 6 |
| Sold as | Each |
| Country of origin | USA |
Vehicle fitment
Match the overall height, center hole and five-stud pattern to your brake setup, and confirm fit for your vehicle’s year, model and trim before ordering.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The rotor is directional, so install it on the left side only. Confirm the 2.781 inch center hole seats correctly on the hub before fitting. The rotor is sold individually, so the right side needs a separate part.
Brake work affects stopping, so road-test slowly after fitting and before returning to highway speeds.
What’s included
One left-side tall hat rotor, sold individually.
Not included: ABS tone ring.
