Overview
The Baer Brakes 6919101 is a 1-piece left replacement brake rotor with a slotted finish, measuring 12.000 Inch outside diameter and 1.020 Inch nominal thickness. It is a vented, directional cast iron rotor made for select Baer Brake systems and sold individually.
Its surface type is slotted. The manufacturer also describes purpose built castings, curved vanes for cooling and dynamic balancing for smooth running. No specific vehicles are named, so match the bolt pattern, center hole and rotor side before buying.
Key features
- Left-side directional rotor, specific to the left side of the vehicle
- Curved vane design intended for optimum cooling
- Full cast, one piece construction in cast iron
- Dynamic balanced for vibration-free performance
- Designed to resist distortion and keep rotor stability
Left-side rotor checks
A directional rotor only works correctly in one position, so the side check should happen before the caliper is removed. Mark or note which side the rotor came from and confirm the hub is the left one before torquing the lugs. Directional rotors also rely on clean mating surfaces, so remove any rust ridge from the hub that could tilt the rotor.
Slotted surfaces benefit from pad material that suits the rotor, and the face should be cleaned after muddy or wet runs. When installing, use the correct lug torque for your vehicle and retighten after a short drive. Consider replacing the pads together with the rotor, since uneven pad wear can mirror a worn slotted face.
- Confirm the hub side before torquing
- Retorque lugs after the first few drives
Specifications
| Brand | Baer Brakes |
|---|---|
| Part number | 6919101 |
| UPC | 90127961414 |
| Axle side | Left |
| Surface type | Slotted |
| Construction | Full cast, one piece |
| Material | Cast iron |
| Solid or vented | Vented |
| Directional brake surface | Directional |
| Outside diameter | 12.000 Inch |
| Nominal thickness | 1.020 Inch |
| Overall height | 2.406 Inch |
| Center hole diameter | 2.836 Inch |
| Stud/lug hole circle diameter | 4.5 Inch |
| Stud/lug hole quantity | 5 |
| Drum in hat | Yes |
| ABS tone ring included | No |
| Grade type | Performance |
| Emission code | 6 |
| Sold as | Each |
| Country of origin | USA |
Vehicle fitment
The rotor is made for select Baer Brake systems. Compare the 5 x 4.50 Inch bolt pattern, 2.836 Inch center hole and rotor side with your system before buying.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Confirm the side before fitting. This rotor is specific to the left side, so a right-side rotor will not match it. The 5 x 4.50 Inch bolt pattern and 2.836 Inch center hole must line up with the hub.
What’s included
One 1-piece left replacement rotor, sold individually.
Not included: Pads, calipers and hub hardware are not part of this single-rotor purchase and must be sourced separately.
