Overview
The Baer Brakes 6911101 is a left-side, 1-piece replacement brake rotor with a plain friction surface, measuring 12.000 in across and 1.020 in nominal thickness. Baer offers it for select Baer Brake systems, and it is sold one rotor at a time. The rotor is directional, so it is built for the left side of the vehicle only, and a right-side rotor is a separate part.
This is a full cast, one-piece vented design with a 5 x 5.00 in bolt pattern and a 2.780 in register. The hat includes a drum, and the rotor is a performance grade part. No ABS tone ring comes with it.
Key features
- Full cast, one-piece vented construction
- Curved vane design, which Baer says aids cooling
- Plain surface with no slots or drilled holes
- Directional design for the left side only
- Dynamically balanced for vibration-free performance.
- Premium cast material designed for rotor stability and resistance to distortion
- Performance grade type
Before you buy
Brake rotors wear with use, so inspect the friction surface for scoring, heat cracks and uneven thickness at every pad change. A plain surface has no grooves to clear debris, so look for glazing and a smooth, even face. Replace a rotor that measures below its minimum thickness, or one that shows deep grooves the new pads cannot bed into.
Rotors are usually replaced together with pads and hardware. Clean the hub face and remove any rust before seating the rotor so it sits flat and runs true. Bed new pads in gently after installation, and avoid hard stops until an even layer has transferred to the rotor.
- Scoring or heat cracks across the friction face
- Thickness below the minimum thickness
- Pulsation through the pedal under braking
Specifications
| Brand | Baer Brakes |
|---|---|
| Part number | 6911101 |
| UPC | 90127961308 |
| Axle side | Left |
| Outside diameter | 12.000 in |
| Nominal thickness | 1.020 in |
| Lug pattern | 5 x 5.00 in bolt circle |
| Center hole and register | 2.780 in |
| Overall height | 2.406 |
| Construction | Full cast, one piece |
| Rotor type | Vented |
| Surface type | Plain |
| Directional | Yes |
| Material | Cast iron |
| Drum in hat | Yes |
| ABS tone ring included | No |
| Emission code | 6 |
| Grade type | Performance |
| Country of origin | USA |
Vehicle fitment
It is designed for select Baer Brake systems. Verify your vehicle’s year, model and trim before you order.
Rotors are directional, so a right-side rotor will not fit the left position. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Because the rotor is directional, mount it on the left side only. Check the parking brake setup for the Baer system before installing the rotor, since the hat includes a drum.
What’s included
One left-side replacement rotor, sold as each.
Not included: a right-side rotor, since rotors are sold individually.
