Overview
The Baer Brakes 6920265 is a right-side, 1-piece plain finish replacement brake rotor with an 11.35-inch outside diameter, made for select Baer Brake systems. It is a vented cast iron rotor with a 0.81-inch nominal thickness and a 5-stud, 4.5-inch pattern, and it is sold individually.
Baer built this replacement as a performance-grade casting from premium materials. The design uses a curved vane layout for cooling, is dynamic balanced for vibration-free running, and is engineered for rotor stability and resistance to distortion. Vented means the disc has internal cooling vanes between its two friction faces. Stud or lug hole circle diameter is the measurement across the centers of opposite studs, which must match the hub exactly. The rotor is directional, so it belongs on the right side of the vehicle only.
Key features
- Full cast, one-piece cast iron construction
- Curved vane design intended to help cooling
- Dynamic balanced for vibration-free performance
- Engineered for rotor stability and resistance to distortion
- Plain surface finish on a vented rotor
- Directional rotor for the right side only
Before you buy
Brake rotors work with the pads, calipers and hub to turn pedal pressure into friction. A vented design uses internal vanes between the two friction faces, which helps the rotor shed heat during repeated stops such as long downhill runs or towing. A plain finish gives an even surface that new pads bed into over a short series of moderate stops.
Before buying, match the rotor to the hub it will mount on. Check the hub face, the center bore and the hardware your caliper bracket needs. Wheel bearings, brake clips and pins, and pads are commonly replaced alongside a rotor, so inspect them while the wheel is off.
- Clean rust and debris from the hub face before mounting
- Tighten lug nuts in a star pattern to specification
- Bed in new pads after installation
- Replace rotors with deep grooves, cracks or a lip on the outer edge
Specifications
| Brand | Baer Brakes |
|---|---|
| Part number | 6920265 |
| UPC | 844165036913 |
| Material | Cast iron |
| Construction | Full cast, one piece |
| Outside diameter | 11.35 inches |
| Nominal thickness | 0.81 inch |
| Overall height | 1.988 inches |
| Center hole diameter | 2.783 inches |
| Register | 2.780 inches |
| Stud/lug hole quantity | 5 |
| Stud/lug hole circle diameter | 4.5 inches |
| Rotor type | Vented |
| Surface type | Plain |
| Brake surface | Directional |
| Axle side | Right |
| ABS tone ring included | No |
| Drum in hat | No |
| Grade type | Performance |
| Emission code | 6 |
| Sold as | Each |
| Country of origin | USA |
Vehicle fitment
No vehicle list is attached to part 6920265, so no make, model or year is confirmed. The rotor is described only as a replacement for select Baer Brake systems, and the right-side, 5-stud, 4.5-inch bolt pattern is the sizing information available.
Installation notes
Because the casting is directional, this rotor goes on the right side only. Match the 5-stud, 4.5-inch pattern and the 2.783-inch center hole against your hub before mounting, and note that the ABS tone ring is not included with this part.
What’s included
One right-side replacement rotor, sold individually.
Not included: Brake pads and calipers are needed separately.
