Overview
The Baer Brakes 31411-020 is a front Claw performance rotor set for the 2005–2019 Nissan Frontier and 2009–2012 Suzuki Equator. It is a pair of direct replacement, one-piece cast iron rotors with a cross-drilled and slotted friction surface, sold as a set. The slots and drilled holes move gases and dust away from between the pad and rotor during braking, helping the pedal feel steady and limiting brake fade.
These rotors suit owners who want a front brake replacement with a zinc-plated finish that shows behind open-center wheels. The fitment covers the 2WD, four-cylinder versions of both trucks.
Key features
- Slotted and drilled friction surface lets gases and dust escape from between pad and rotor
- Enhanced vane structure with premium materials for cooling and durability
- Premium, mill balanced, direct replacement rotor
- Chamfered cross-drilled holes designed to minimize stress cracking
- Zinc-plated finish for a bright look in open-center wheels
- Vented rotor with a directional brake surface
Front brake wear checks
Front rotors take the largest share of braking load on most trucks, so they wear faster than rear rotors on the same vehicle. Before fitting a new front set, check the wheel bearings for play, inspect the hub face for rust, and look at the caliper slide pins for smooth movement. Any of these problems can cause uneven wear on the new rotors within a short time.
Vented rotors dissipate heat through the internal vanes, which is why they are common on front axles. A rotor that shows blueing, hard spots or a raised lip should be replaced. Good pad selection matters too: a pad that is too hard can score a slotted rotor, while a soft pad may wear quickly under towing or hard stops.
- Check wheel bearings for play
- Clean rust from the hub mounting face
- Lubricate caliper slide pins during service
Specifications
| Brand | Baer Brakes |
|---|---|
| Part number | 31411-020 |
| UPC | 844165045502 |
| Sold as | Set (a pair of rotors) |
| Rotor construction | One piece, full cast |
| Material | Cast iron |
| Disc finish | Zinc plated |
| Surface type | Slotted and drilled |
| Rotor type | Vented |
| Brake surface | Directional |
| Axle | Front |
| Drive | 2WD |
| Stud/lug hole quantity | 6 |
| Mounting bolt hole circle diameter | 114 |
| Outside diameter | 283 |
| Overall height | 38.2 |
| Discard thickness | 26 |
| Grade type | Premium |
| Emission code | 6 |
| ABS tone ring included | No |
| Country of origin | CN |
Vehicle fitment
Baer’s manufacturer fitment list covers these front applications: 2005–2019 Nissan Frontier (four-cylinder, rear-wheel drive per the list) and 2009–2012 Suzuki Equator (four-cylinder, rear-wheel drive per the list). The title narrows the set to 2WD four-cylinder trucks.
Not covered: 4WD versions of either truck, Frontier model years outside 2005–2019, and Equator model years after 2012. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
These are direct replacement rotors, so they mount in place of the factory front rotors. The ABS tone ring is not included with the set. Have a qualified technician perform the brake work.
What’s included
One set: a pair of front Claw performance rotors.
Not included: ABS tone ring.
















