Overview
The Baer Brakes 6920267 is a right-side, one-piece full cast replacement brake rotor with a slotted finish, made for select Baer Brake systems. The vented cast iron ring measures 11.35 inches outside diameter and 0.81 inches nominal thickness, and each listing is one rotor.
Its braking surface is slotted only, with no drilling or zinc plating. The rotor is directional and tied to the right side of the vehicle. It has a 1.988 inch overall height and a 2.783 inch center hole, and its curved vane design supports cooling and dynamic balancing for smooth running.
Key features
- One-piece full cast construction
- Right-side, directional rotor ring
- Slotted braking surface
- Five mounting holes on a 4.50 inch bolt circle
- Curved vane design for cooling
- Designed for rotor stability and resistance to distortion
- Dynamic balanced for smooth running
Choosing the right rotor setup
Brake rotors work with the pads, calipers and hub as one system. When the rotor turns, the pads clamp on its friction faces and convert motion into heat, so the ring must stay flat and true to the hub. Slotted faces give pads a channel to shed dust, water and worn pad material, which helps the surface keep contact on wet or dusty roads. This is useful for trail driving where mud and grit build up quickly.
Before fitting, clean the hub face and remove rust or old corrosion so the rotor seats flat against it. Check that the pads suit the rotor thickness and that the caliper bracket clears the ring. Replacing rotors in pairs on the same axle keeps braking even from side to side.
- Clean the hub and register surfaces before mounting
- Tighten lug nuts in a star pattern
- Bed in new pads gradually after installation
- Watch for pulsing, squealing or grinding as signs of wear
- Inspect the friction surface for deep grooves or heat cracks
- Check runout with a dial indicator once the rotor is mounted
Specifications
| Brand | Baer Brakes |
|---|---|
| Part number | 6920267 |
| UPC | 90127961896 |
| Axle position | Right |
| Construction | Full cast, one piece |
| Rotor type | Vented |
| Brake surface | Directional |
| Outside diameter | 11.35 in |
| Nominal thickness | 0.81 in |
| Rotor diameter code | 11-D x .810-S |
| Overall height | 1.988 in |
| Center hole diameter | 2.783 in |
| Register | 2.780 in |
| Stud/lug hole quantity | 5 |
| Stud/lug hole circle diameter | 4.50 in |
| Surface type | Slotted |
| Material | Cast iron |
| Drum in hat | No |
| Grade type | Performance |
| ABS tone ring included | No |
| Emission code | 6 |
| Country of origin | USA |
| Sold as | Each |
Vehicle fitment
It is sold for select Baer Brake systems. Confirm fit for your vehicle’s year, model and trim before ordering, and compare the stud pattern with your hub before fitting.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The ring is directional, so install it on the right-hand hub only and confirm orientation before the wheel is reattached. Compare the 2.783 inch center hole and 2.780 inch register with the hub. A qualified technician should check fit and clearance before the vehicle is driven.
What’s included
One right-side, one-piece slotted replacement rotor, sold individually.
Not included: ABS tone ring.
