Overview
The Baer Brakes 6920521 is a right-side, 1-piece replacement brake rotor with a 14.000 inch outside diameter and 0.799 inch nominal thickness. It has a plain finish and is made for select Baer Brake systems. It is sold as each, one rotor per part number.
Baer’s rotor is directional, so the right-hand version is built for one side of the vehicle and should go only on the right. It is a full cast, vented design in cast iron, with a curved vane pattern for cooling and dynamic balancing for vibration-free running. Confirm fit for your vehicle’s year, model and trim before ordering.
Key features
- Right-side directional rotor for select Baer Brake systems
- Full cast, one-piece vented construction in cast iron
- Curved vane layout intended to improve cooling
- Designed for rotor stability and resistance to distortion
- Dynamically balanced for vibration-free performance
- Plain friction surface with a 6 x 5.50 inch bolt pattern
Before you buy
A replacement rotor works as one part of a larger braking system. The pads, calipers, hub and wheel bearings all affect how the rotor wears and how smoothly the brakes respond. Before ordering, check the rotor you are removing for thickness, scoring and runout, and compare its diameter and mounting face with the new part. A rotor thinner than its minimum thickness should be replaced rather than resurfaced.
Directional rotors need extra care at installation. The curved vane pattern is meant to move air through the disc, so the rotor must be oriented as designed. Clean the hub face and mating surfaces thoroughly, then tighten the wheel fasteners in a star pattern and re-check them after the first few stops.
- Check the hub face for rust or debris before fitting
- Replace pads together with the rotor when pad material is low
- Inspect the ABS tone ring if the braking system depends on it
- Bed in new pads with a series of moderate stops
Specifications
| Brand | Baer Brakes |
|---|---|
| Part number | 6920521 |
| UPC | 90127962008 |
| Outside diameter | 14.000 inch |
| Nominal thickness | 0.799 inch |
| Overall height | 3.366 inch |
| Stud/lug bolt circle diameter | 5.50 inch |
| Stud/lug quantity | 6 |
| Center register diameter | 3.094 inch |
| Construction | Full cast, one piece |
| Rotor type | Vented |
| Brake surface | Directional |
| Surface type | Plain |
| Material | Cast iron |
| Drum in hat | Yes |
| ABS tone ring included | No |
| Axle | Right |
| Grade type | Performance |
| Emission code | 6 |
| Sold as | Each |
| Country of origin | USA |
Vehicle fitment
This right-side rotor is made for select Baer Brake systems. Match the 14.000 inch diameter, 6 x 5.50 inch bolt pattern and 3.094 inch center register to your existing hardware before installing it.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Mount this rotor on the right side only. No ABS tone ring is included, so plan on reusing or sourcing one if your brake system depends on it. Brakes are safety-critical, so have the work done by a technician who knows Baer systems.
What’s included
One right-side replacement rotor, sold as each.
Not included: ABS tone ring; none is supplied with this rotor.
