Overview
The Baer Brakes 6910093 is a left-side, 12.000 inch slotted 1-piece replacement brake rotor with a short hat. It is a directional rotor made for the left side of the vehicle and is used in select Baer Brake systems. The rotor is sold as each.
Baer Brakes built it as a purpose-built cast rotor with curved vanes for cooling and a design aimed at stability and resistance to distortion. Its 5 x 4.50 inch bolt pattern, 2.783 inch center bore and .810 inch nominal thickness are the dimensions to match against your existing hub and Baer system.
Key features
- Left-side, directional brake surface
- Curved vane design intended to improve cooling
- Full cast, one-piece cast iron construction
- Slotted surface on a vented rotor
- Dynamically balanced for vibration-free running
- Engineered for rotor stability and resistance to distortion
Choosing the right setup
Brake rotors are one part of a system that includes hubs, calipers, pads and the hat that centers the rotor on the axle. Before ordering, measure the hub face and the caliper bracket clearance, since a rotor that matches the bolt pattern can still sit at the wrong height if the hub surface is worn or the bracket is bent. Surface finish and vane design affect how the rotor handles heat, but the mounting dimensions decide whether it installs at all.
Rotors wear through thickness loss, scoring and heat cracks. Measure the minimum thickness stamped on the old rotor, and replace it when it falls below that figure or when the surface shows deep grooves, blue discoloration or pulsing under braking. Pads, hardware and wheel bearings are commonly inspected at the same time, since a worn bearing or loose hardware can cause the same vibration a warped rotor produces.
Specifications
| Brand | Baer Brakes |
|---|---|
| Part number | 6910093 |
| UPC | 90127960882 |
| Axle | Left |
| Outside diameter | 12.000 inch |
| Nominal thickness | .810 inch |
| Stud/lug hole circle diameter | 4.50 inch |
| Stud/lug hole quantity | 5 |
| Center hole diameter | 2.783 inch |
| Overall height | 1.988 inch |
| Material | Cast iron |
| Construction | Full cast, one piece |
| Surface type | Slotted |
| Solid or vented type | Vented |
| Directional or non-directional brake surface | Directional |
| Grade type | Performance |
| Drum in hat | No |
| ABS tone ring included | No |
| Emission code | 6 |
| Sold as | Each |
| Country of origin | USA |
Vehicle fitment
It is a replacement for select Baer Brake systems. Match your vehicle’s year, model and trim to the Baer system before ordering, and compare the 5 x 4.50 inch bolt pattern, 2.783 inch center bore and 12.000 inch diameter with your current setup.
Installation notes
The rotor is directional, so fit the left-side part only on the left hub. Measure your existing hub and caliper bracket against the 2.783 inch center bore, the 5 x 4.50 inch bolt pattern and the 1.988 inch overall height before installation. Have a qualified brake technician install and test the rotor.
What’s included
One left-side replacement rotor, sold as each.
Not included: An ABS tone ring, since the rotor is listed without one.
