Select your vehicle

Skyjacker Stainless Steel Front Brake Line – FBL80

Skyjacker

$140.25In stock
Buy on Amazon

See similar parts on Amazon

Price and availability as of Nov 18, 2026 7:20 AM MST, from Amazon.com, and subject to change. The Amazon listing has the current details.

Check out with your Amazon account. Amazon handles delivery and returns.

Slickrock 4X4 is a participant in the Amazon Associates Program. As an Amazon Associate we earn from qualifying purchases.

  • Front brake lines for 1980-1989 Ford Bronco and F-150
  • For a 4 to 8 inch lift
  • Stainless steel braided hose with brass fitting
  • Pair

Description

Overview

The Skyjacker FBL80 (part number SKYFBL80) is a pair of stainless steel braided front brake lines for the 1980-1989 Ford Bronco and F-150 with a lift of 4 to 8 inches.

The hose uses a brass fitting and an extruded polyurethane outer coating. It is DOT certified and approved to European T.U.V. standards.

Key features

  • Direct-fit front hoses for the Bronco and F-150
  • Stainless steel braided hose
  • Heavy-duty off-road brass fitting
  • Extruded polyurethane coating
  • DOT certified and European T.U.V. approved
  • Limited lifetime warranty

Brake hose care on lifted Fords

Flexible brake hoses let the front wheels turn and move with suspension travel, so they are often the first brake part to be changed when a truck is lifted. Longer hoses reduce strain at full steering lock and when the axle flexes on rough ground.

Braided stainless hose resists swelling better than rubber, but the fittings and crimp areas still need checking. Look for cracks in the outer coating, seepage at each end, and rubbing against the frame or tires. Check the brake fluid level after a hose change.

After installation, bleed the brakes, test the pedal and watch the hoses through a full turn. Replace hoses in pairs so the front brakes respond evenly.

  • Check fittings for seepage
  • Inspect the coating for abrasion
  • Bleed the brakes after replacing

Specifications

Brand Skyjacker
Part number SKYFBL80
Product type Stainless steel braided brake hose
Hose material Stainless steel
Fitting Heavy-duty off-road brass
Outer coating Extruded polyurethane
Position Front
Lift height 4 to 8 inches
Quantity Pair
Fit type Direct fit

Vehicle fitment

It fits the 1980-1989 Ford Bronco and the 1980-1989 Ford F-150.

Other Ford trucks and model years are not on the list. Confirm your vehicle’s year, model and trim before ordering.

Fitment

VehicleYearsTrims
Ford Bronco1980–1989Custom, Eddie Bauer, Ranger XLT, XLS, XLT, XLT Lariat
Ford F-1501980–1989Base, Custom, Ranger, Ranger Lariat, Ranger XLT, XL, XLS, XLT, XLT Lariat

Use “Select your vehicle” at the top of the page to check this part against your vehicle.

Questions & Answers

Does the Skyjacker FBL80 fit a 1985 Ford Bronco?

Yes. The FBL80 fits the 1980-1989 Ford Bronco, so a 1985 Bronco is covered. The F-150 of those years is also included.

What lift does the FBL80 suit?

Skyjacker gives a lift range of 4 to 8 inches for this front set. The hoses are longer than stock.

How are the FBL80 hoses built?

Each hose is stainless steel braided with a heavy-duty off-road brass fitting and an extruded polyurethane outer coating, covered by a limited lifetime warranty.

How often should brake hoses be inspected?

Inspect them at every brake service and whenever tires or wheels are removed. Look for cracks, bulges, chafing and any fluid seeping from the fittings before continuing to drive.

Can a front brake hose be replaced by itself?

Replacing a single hose is possible, but front hoses are usually changed as a pair so both wheels respond the same. Bleed the brakes after any hose is disconnected.

Ready to order?

Order this part on Amazon and check out with your Amazon account. Amazon handles delivery and returns.

Buy on Amazon