Overview
The Baer Brakes 4302248B is a black Pro Plus rear disc brake system for GM 10/12 bolt rear axles with C-clip axles and the small car pattern flange. Its six-piston caliper clamps a 13 inch two-piece slotted, drilled and zinc-plated rotor, while the backing plate carries a one-piece park brake shoe assembly. It targets rear axle upgrades on wheels with 5×4.75 and 5×5.00 bolt patterns.
The components are made in Phoenix, Az. Baer machines the aluminum parts from forged or billet stock and finishes them in powder coat. The caliper uses stainless steel pistons, abutments and noise suppression clips, and staggered pistons aim to limit uneven pad wear. Dual seals cover dust, weather and pressure.
Key features
- Six-piston caliper in black with stainless steel pistons
- Staggered piston layout to minimize uneven pad wear
- Dual dust, weather and pressure seals
- Two-piece slotted, drilled, zinc-plated rotor with billet aluminum hat
- Backing plate serves as caliper mount and holds the park brake shoe
- Stainless braided hoses with hardware, DOT approved
- Pads use the D0731 pad type
- Powder coated finish on CNC-machined components
Park brake and lug nut prep
Park brake cables and lug nuts are often the last items sorted on a rear brake job, which can stall the work. Lay out the full parts list before starting, so cable routing, lug nut seats and wheel studs are ready when the backing plate goes on. Old cables should be inspected for frayed sheathing and stiff movement, since a seized cable can leave the park brake inoperative.
A black caliper finish is mainly a visual choice, but the metal surfaces still need regular care. Keep calipers clean of road grime, and avoid high-pressure water aimed directly at the hub seal area. Pad replacement works best when the rotor surface is clean and free of rust rings, so check the rotor before fitting new pads.
- Stage cables, lug nuts and studs before lifting the vehicle
- Inspect old cables for stiffness or frayed sheathing
- Clean rust rings from the rotor hat before fitting
- Check the park brake hold on a level surface after assembly
Specifications
| Brand | Baer Brakes |
|---|---|
| Part number | 4302248B |
| UPC | 844165043003 |
| Package type | Kit |
| Caliper | 6-piston, floating, black |
| Caliper piston quantity | 6 |
| Rotor type | 2-piece, vented, slotted and drilled, zinc plated |
| Rotor material | Iron with aluminum hat |
| Rotor outside diameter | 13.0 inch |
| Rotor thickness | 1.1 |
| Minimum wheel diameter | 17.0 inch |
| Wheel bolt pattern | 5×4.75/5×5.00 |
| Lug count | 5 lug |
| Axle flange | GM 10/12 bolt C-clip, small car pattern |
| Brake pad FMSI | D0731 |
| Template | Q110H |
| Hose material | Steel braided, DOT approved |
| Grade type | Performance |
| Includes park brake | Yes |
| Includes park brake cables | No |
| Country of origin | US |
Vehicle fitment
It is made for GM 10/12 bolt rear axles with C-clip axles, small car pattern flanges, and 5×4.75 or 5×5.00 wheel bolt patterns with 5 lugs. Measure your rear axle and wheel bolt pattern against those details before you order.
Rear housings with a different flange pattern or non-C-clip axles are outside the specifications described here. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Lay the Q110H template against the wheel you plan to run, since the manufacturer cannot promise fit across every wheel style. Stainless hardware comes pre-assembled on the rotors.
What’s included
The package covers the black six-piston caliper, the 13 inch two-piece rear rotor, the backing plate with its one-piece park brake shoe assembly, and stainless braided hoses with hardware.
Not included: front rotor, park brake cables, and lug nuts, all of which you will need to source separately.















