Overview
The Baer Brakes 4262148S is a Pro Plus 13.0 inch rear brake kit in silver for Ford 9 inch rear axles with the early big bearing housing flange and a 5×4.50/5×4.75 wheel bolt pattern. It pairs a 6-piston fixed caliper with a two-piece slotted, drilled and zinc plated rotor, and it is sold as a complete rear system.
Baer built the Pro Plus line for rear axles that need more braking hardware than a stock setup, and it is offered in the Performance grade. The backing plate serves as the caliper mount and also houses a one-piece park brake shoe assembly, so the parking brake is built into the rear kit. The pads use the D0731 pad type.
Key features
- Six-piston 6P fixed caliper with a powder coated silver finish, CNC machined from US sourced forged or billet aluminum.
- Stainless steel pistons, abutments and noise suppression clips.
- Staggered pistons designed to reduce uneven pad wear.
- Dual seals guard against dust, weather and pressure.
- Two-piece slotted, drilled and zinc plated rotor with a billet aluminum hat.
- One-piece park brake shoe assembly housed in the backing plate.
- Stainless braided hoses and stainless hardware included.
Before you buy
A rear disc kit changes how the parking brake and service brakes work together, so check how the setup will be used before ordering. Heavier loads, steep grades and frequent stops put more heat into the rotors and pads than casual driving does. Matching the pad compound to your driving style helps the pads reach working temperature and wear evenly.
Rear hardware is often replaced together. Brake hoses, wheel bearings and the parking brake cable are reviewed at the same time because they affect the same rear assembly. Wheel offset and tire size also matter, since they change how much room the caliper and rotor have inside the wheel.
After installation, bed in the pads with a series of moderate stops before any hard braking, and recheck bolt torque after the first few drives.
Specifications
| Brand | Baer Brakes |
|---|---|
| Part number | 4262148S |
| UPC | 844165021858 |
| Sold as | Kit |
| Axle | Rear |
| Axle flange | Ford 9 Inch Early Big Bearing |
| Wheel bolt pattern | 5×4.50/5×4.75 |
| Lug count | 5 lug |
| Caliper | 6P, 6-piston fixed |
| Caliper color | Silver |
| Rotor outside diameter | 13.0 inch |
| Rotor type | 2-piece, vented |
| Rotor surface | Slotted, drilled and zinc plated |
| Rotor material | Iron with aluminum hat |
| Rotor thickness | 1.1 |
| Pad type (FMSI) | D0731 |
| Hose material | Steel braided, DOT approved |
| Park brake included | Yes |
| Park brake cables included | No |
| Minimum wheel diameter | 17.0 inch |
| Emission code | 6 |
| Template | Q082H |
| Grade | Performance |
| Country of origin | US |
Vehicle fitment
It is built for Ford 9 inch Early Big Bearing rear axle housings with a 5 lug, 5×4.50/5×4.75 bolt pattern, and it suits wheels of 17 inch minimum diameter or larger.
Use template Q082H to compare the rotor and caliper with your wheel before ordering. Confirm fit for your vehicle’s year, model and trim before ordering.
Installation notes
The rotors arrive pre-assembled with stainless hardware, and the stainless braided hoses come with the kit. Park brake cables are not included, so cables must be sourced separately. Verify the bolt pattern and minimum wheel diameter before fitting. Brake work should be carried out by a qualified mechanic.
What’s included
Rear 13.0 inch two-piece rotors pre-assembled with stainless hardware, 6P fixed calipers, the backing plate with its park brake shoe assembly, and stainless braided hoses and hardware.
Not included: front rotors, park brake cables and lug nuts.















