Overview
The Baer Brakes SS4 Plus rear brake system, part number 4262260R in red, is a 13 inch two-piece rear disc brake kit for Ford 9 inch early big bearing housing ends with 5×4.50/5×4.75 bolt patterns. It pairs a four-piston S4 caliper with a slotted, drilled, zinc-plated rotor that has a billet aluminum hat.
The backing plate serves as the caliper mount and houses a one-piece park brake shoe assembly. The kit uses the DR1-C pad type and is sized for wheels 17 inch or larger, with a 17.0 inch minimum wheel diameter.
Key features
- Four-piston S4 caliper, fixed type, finished in red
- Two-piece rotor, 13.0 inch outside diameter, slotted, drilled and zinc plated
- Rotors come pre-assembled with NAS high grade stainless hardware
- Hard anodized aluminum pistons with stainless steel abutments and noise suppression clips
- Dual seals for dust, weather and pressure
- Stainless steel braided brake hoses, DOT approved
- CNC machined from US sourced forged or billet aluminum with a powder coated finish
- Park brake shoe assembly housed in the backing plate
Choosing wheels for this kit
Wheel fit goes beyond the bolt pattern. The caliper and rotor sit inside the wheel, so the inner barrel depth, spoke shape and wheel offset all decide whether the caliper clears. Set the wheel on the hub and turn it by hand, checking each spoke and the caliper body, before the tire is mounted.
Tire size and load rating also change how the brakes feel. A larger tire adds rotating weight and can shift the braking balance, while a higher load rating helps when the vehicle is loaded or towing. Keep the lug seats clean and use lug nuts that suit the wheel, since lug nuts are not part of the kit.
- Inner barrel depth and spoke shape
- Offset and caliper clearance
- Tire size and rotating weight
- Lug nut seat type
Specifications
| Brand | Baer Brakes |
|---|---|
| Part number | 4262260R |
| UPC | 844165028345 |
| Caliper | S4, 4 pistons, fixed type |
| Caliper color | Red |
| Rotor outside diameter | 13.0 inch |
| Rotor type and construction | 2-piece, vented |
| Rotor material | Iron with aluminum hat |
| Rotor surface | Slotted, drilled and zinc plated |
| Rotor thickness | 0.81 |
| Pad type | DR1-C (FMSI) |
| Brake hose | Steel braided, DOT approved |
| Lug count | 5 lug |
| Wheel bolt pattern | 5×4.50/5×4.75 |
| Minimum wheel diameter | 17.0 inch |
| Axle flange | Ford 9 inch early big bearing |
| Park brake included | Yes |
| Template | S135H |
| Grade | Performance |
| Sold as | Kit |
| Country of origin | US |
Vehicle fitment
It is made for Ford 9 inch early big bearing housing ends with a 5×4.50/5×4.75 bolt pattern. Match the axle flange and bolt pattern on your rear ends before buying.
Fit depends on wheel style, so compare the S135H template to your wheel. Vehicle year, model and trim still need a match, so confirm them before ordering.
Installation notes
The rotors come pre-assembled with stainless hardware, and the hoses and hardware are supplied as stainless steel. Test-fit the S135H template against the wheel you plan to use before the rotor goes on, since wheel clearance varies by style. Park brake cables must be obtained separately.
What’s included
The kit includes the S4 four-piston caliper, the pre-assembled two-piece 13.0 inch rotor, the backing plate with its one-piece park brake shoe assembly, stainless steel braided hoses and the stainless hardware for the rotors.
Left out of the box: the park brake cables, the lug nuts and the front rotor, all of which need to be obtained separately.















