Overview
The Baer Brakes 4262684C is a deep stage dual rear brake kit for Ford 8.8 inch rear ends with C-clip eliminators and a 2.5 inch axle standoff. It uses four S4 calipers in a clear finish over 11 inch two-piece slotted, drilled rotors, built for drag racing and heavy cars that may also be driven on the street.
Baer Brakes positions the SS4 Plus Dual Deep Stage as its first drag system designed for a smaller package, carrying benefits from its larger brake systems into a setup that clears 15 inch wheels. The kit runs the DR1 or HB100 pad type with high friction pads for drag race applications, and it is manufactured in Phoenix, Az.
Key features
- Four S4 calipers with 4-piston design and 1.375 inch pistons
- Clear caliper finish with powder coated surfaces
- Two-piece rotors, slotted, drilled and zinc plated, with iron rotor and aluminum hat
- Billet aluminum hats drilled for 5/8 inch wheel studs
- Rotors pre-assembled with NAS high grade stainless hardware
- Hard anodized aluminum pistons with stainless steel abutments and noise suppression clips
Choosing a rear brake setup
A deep stage rear kit replaces the factory rear drums or smaller discs with a larger rotor and multi-piston caliper arrangement. The added rotor diameter and pad area help the brakes resist fade when they are used repeatedly, which is why this type of setup is common on heavier vehicles and on cars run in competition.
Before choosing a kit like this, look at the axle housing type, the axle flange measurement and the wheel clearance together. A kit that fits the housing but leaves little room behind the wheel can cause rubbing, so check the wheel’s offset and minimum diameter against the rotor size. The pad compound also matters: a high friction pad suits hard stops and competition use, while street driving may call for a milder compound that is kinder to rotors.
- Confirm the housing style before buying any rear brake kit.
- Plan for a matching brake hose set and a fresh fluid change during installation.
- Re-torque the rotor hardware after the first few heat cycles.
- Inspect pads and rotors for uneven wear at regular intervals.
Specifications
| Brand | Baer Brakes |
|---|---|
| Part number | 4262684C |
| UPC | 844165049067 |
| Sold as | Kit |
| Caliper | S4, 4-piston, fixed, clear, 4 calipers |
| Piston size | 1.375 inch |
| Rotor outside diameter | 11.0 inch |
| Rotor thickness | 1.02 |
| Rotor type | 2-piece, vented, slotted and drilled, zinc plated |
| Rotor material | Iron with aluminum hat |
| Pad type | DR1 or HB100, semi-metallic friction material |
| Axle flange | Ford 8.8 inch, C-clip eliminator housing |
| Axle standoff | 2.5 inch |
| Axle flange dimension | 5.75 inch |
| Wheel bolt pattern | 5×4.50/5×4.75 |
| Lug count | 5 lug |
| Minimum wheel diameter | 15.0 inch |
| Template | S125A |
| Emission code | 6 |
| Park brake | No |
Vehicle fitment
This kit is built for Ford 8.8 inch rear ends with C-clip eliminators, so the housing and its 5.75 inch axle flange determine fit. Confirm fit for your vehicle’s year, model and trim before ordering.
Ford small bearing housing ends and GM small pattern housings are different designs and are not covered by this kit. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Check the axle flange against the 5.75 inch requirement before assembly. The 2.5 inch axle standoff should be confirmed against your housing. Rotors arrive pre-assembled with stainless hardware, and mounting hardware is included. Brake hoses must be sourced separately.
What’s included
The kit includes four S4 calipers in clear finish with 1.375 inch pistons, pre-assembled two-piece rotors, DR1 or HB100 pads, and mounting hardware for the dual rear setup.
Not included: the front rotor, lug nuts, hoses and any parking brake assembly.















