Overview
The Baer Brakes 4262325S is a silver rear disc brake kit from the SS4 Plus line, built for Ford 9 inch rear ends with Torino (Late Big) bearing housing ends. It pairs an 11.0 inch two-piece rotor with a four-piston S4 caliper and drills for a 5 on 4.50 or 5 on 4.75 bolt circle. It suits wheels of 15 inch diameter or larger, with a minimum wheel diameter of 15.0 inch.
This is a complete rear brake system kit, with pre-assembled rotors, mounting brackets and stainless braided hoses. It does not include a park brake, and lug nuts are not part of the kit. Because Baer cannot guarantee fit with every wheel style, check the S125A template against the wheel you plan to run.
Key features
- Four-piston S4 caliper with hard anodized aluminum pistons and stainless steel abutments
- CNC machined from US sourced forged or billet aluminum, with a powder coated finish
- Dual dust, weather and pressure seals, with dust and weather seals rated T compliant.
- Two-piece slotted, drilled and zinc-plated vented rotor with a billet aluminum hat
- Noise suppression clips and stainless hardware pre-assembled on the rotors
- Stainless braided hoses, mounting brackets and hardware included
- Uses the DR1-C pad type
Before you buy
Rear disc conversions move braking load through the axle housing and bracket assembly, so the rotor, caliper and mounting brackets work best when they are treated as one system. Wheel design affects clearance around the caliper and rotor hat, which is why the template check matters more with deep-dish or spoked wheels than with flat-face designs.
Pad choice and rotor condition matter after installation. Slotted and drilled rotors handle heat and gas differently than plain ones, and the DR1-C pads should be bedded in with a series of moderate stops before hard braking. Inspect rotor faces for cracks and check pad thickness at every service interval.
- Measure wheel backspacing before mounting
- Keep a separate parking brake plan in place
- Recheck caliper bolts after the first few drives
Specifications
| Brand | Baer Brakes |
|---|---|
| Part number | 4262325S |
| UPC | 844165048947 |
| Caliper | S4, four-piston, fixed |
| Caliper color | Silver |
| Rotor outside diameter | 11.0 inch |
| Rotor thickness | 1.020 inch |
| Rotor construction | Vented, two-piece |
| Rotor material | Iron with aluminum hat |
| Rotor surface | Slotted, drilled and zinc plated |
| Pad FMSI number | DR1-C |
| Minimum wheel diameter | 15.0 inch |
| Lug count | 5 lug |
| Bolt pattern | 5×4.50/5×4.75 |
| Axle flange | Ford 9 inch Torino/Late Big bearing |
| Brake hose | Steel braided, DOT approved |
| Park brake | No |
| Lug nuts included | No |
| Sold as | Kit |
| Template | S125A |
| Country of origin | US |
Vehicle fitment
It is matched to the Ford 9 inch axle with Torino (Late Big) bearing housing ends. Confirm fit for your vehicle’s year, model and trim before ordering. Check your axle housing ends and wheel clearance against the S125A template before ordering.
Small Bearing housing ends use a different flange and are not covered by this kit. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The rotors arrive pre-assembled with stainless hardware, so the work centers on mounting the brackets, calipers and rotors to the axle. Because no park brake is included, plan a separate parking brake solution if your use requires one. Bleed the brake lines after installation and test the pedal before driving.
What’s included
Rear brake system with S4 calipers, two-piece rotors pre-assembled with NAS high grade stainless hardware, mounting brackets, stainless braided hoses and hardware.
Not included: lug nuts, park brake, front rotor.















