Overview
The Baer Brakes 4262193S is a complete Pro Plus rear brake system for Ford 9 inch rear ends with Torino (late big) bearing housing ends and a 5×5.00 wheel bolt pattern. It centers on a silver six-piston fixed caliper that clamps a 13.0 inch, two-piece slotted and drilled rotor with a billet aluminum hat, and it uses the Q082H template and D0731 pad type.
The backing plate mounts the caliper and houses a one-piece park brake shoe assembly, so the park brake sits inside the rear package. The rotors arrive pre-assembled with NAS high grade stainless hardware, and the staggered pistons help reduce uneven pad wear. The 13 inch Pro Plus is designed for wheels 17 inch or larger, but wheel style can still affect fit, so compare the Q082H template to your wheel.
Key features
- Silver six-piston fixed caliper with stainless steel pistons, abutments and noise suppression clips
- Staggered pistons designed to minimize uneven pad wear
- Dual seals for dust, weather and pressure
- Two-piece slotted, drilled and zinc plated rotor with billet aluminum hat
- Integrated one-piece park brake shoe assembly housed in the backing plate
- Stainless braided hoses, DOT approved, with stainless hardware
- Caliper components CNC machined from US sourced forged or billet aluminum with a powder coated finish
Park brake and hydraulics
A park brake built into the rear backing plate is serviced with the wheel off, so it is worth inspecting during any pad change. Check that the shoe moves freely and that the adjuster turns without binding. A shoe that is worn or contaminated with brake fluid should be replaced rather than cleaned up and reused.
Braided hoses carry pressure to the caliper and should be checked at each service. Chafing against the frame, cracked fittings and bulges are all reasons to replace a hose. After any hose or caliper work, bleed the system and confirm the pedal feels firm before driving on the trail or the road.
- Confirm the park brake shoe moves freely at each service
- Replace a contaminated park brake shoe rather than reusing it
- Bleed and test the pedal after hose work
Specifications
| Brand | Baer Brakes |
|---|---|
| Part number | 4262193S |
| UPC | 844165037156 |
| Caliper | Six-piston (6P) fixed, silver |
| Rotor outside diameter | 13.0 inch |
| Minimum wheel diameter | 17.0 inch |
| Rotor thickness | 1.1 |
| Rotor type | 2-piece, vented |
| Rotor style | Slotted, drilled |
| Rotor material | Iron with aluminum hat |
| Surface finish | Zinc plated |
| Lug count | 5 lug |
| Wheel bolt pattern | 5×5.00 |
| Pad type (FMSI) | D0731 |
| Template | Q082H |
| Hose material | Steel braided, DOT approved |
| Axle flange | Ford 9 inch Torino/late big bearing |
| Hardware | NAS high grade stainless |
| Grade | Performance |
| Country of origin | US |
Vehicle fitment
It fits Ford 9 inch rear ends with Torino (late big) bearing housing ends and a 5×5.00 bolt pattern. Confirm fit for your vehicle’s year, model and trim before ordering.
This is a rear brake kit only and does not cover front brakes. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The park brake shoe assembly sits inside the backing plate, so the park brake is part of the rear installation. Park brake cables are not included, so the park brake will need its own cable setup. Check wheel clearance against the Q082H template before mounting, because Baer does not guarantee fit with every wheel style. Brake hydraulics should be bled after any hose or caliper work.
What’s included
The kit includes the silver six-piston caliper, the two-piece rear rotor with aluminum hat, the backing plate with its park brake shoe assembly, stainless braided hoses and the pre-assembled stainless hardware.
Not included: park brake cables, lug nuts and the front rotor are not part of this kit.















