Overview
The G2 Axle and Gear 93-65-125 is a 5 on 4.5 bolt pattern wheel spacer, 1.25 inch thick, made of aluminum with a black anodized finish. Spacers mount between the hub and the wheel and push the wheel outward, which changes offset and can add tire clearance. It is a universal fit part, so it is not matched to one vehicle.
The spacer comes as a pair with pre-installed wheel studs, lug nuts and thread locker compound. The bolt pattern is the first check: a hub with 5 on 4.5 lugs is the layout this spacer is sized for, and a different pattern will not line up. If your current wheels sit close to the fender or suspension, the 1.25 inch figure tells you how much extra room the spacer adds at the hub. Thickness and clearance decide the rest.
Key features
- 5 on 4.5 bolt pattern
- 1.25 inch thickness
- Aluminum body with black anodized finish
- Pre-installed wheel studs, lug nuts and thread locker compound
- Supplied in pairs
- Listed by G2 as universal fit
Wheel clearance checks
Spacers change the wheel’s offset, so the tire moves outward and the wheel bearings and steering components see a different load path. Look at the space between the wheel and the brake caliper, the fender edge and the suspension before installing. Measure these clearances on the vehicle, since the spacer alone does not show how the wheel will sit.
Aluminum spacers still need full contact with the hub face and a clean seat. Keep the mating surfaces free of paint and grit, and confirm the stud length suits your spacer thickness. Lug nuts should be rechecked after the first drives, since spacers can settle as they seat.
- Check caliper and fender clearance
- Test full steering lock
- Confirm stud length for the spacer thickness
- Recheck lug nuts after the first drives
Specifications
| Brand | G2 Axle and Gear |
|---|---|
| Part number | 93-65-125 |
| UPC | 631410112238 |
| Type | Spacer |
| Bolt pattern | 5 on 4.5 |
| Thickness | 1.25 inch |
| Material | Aluminum |
| Finish | Black anodized |
| Quantity | Supplied in pairs |
| Included hardware | Pre-installed wheel studs, lug nuts and thread locker compound |
| Fitment | Universal fit |
Vehicle fitment
The spacer is a universal fit part, so no year, model or trim is matched to it. Fit depends on the hub’s bolt pattern and on clearance between the tire, wheel and suspension. Check those measurements on your own vehicle before ordering, since a matching pattern alone does not confirm clearance.
Confirm your vehicle’s year, model and trim before ordering. A matching 5 on 4.5 pattern does not by itself show that the spacer clears the wheel, brake or suspension components on your vehicle.
Installation notes
The studs, lug nuts and thread locker are already applied, so the spacer and its hardware are handled as a single assembly when mounting. A 1.25 inch spacer shifts the wheel outward, so once it is installed, check tire clearance through full steering travel and suspension movement.
What’s included
A pair of 5 on 4.5 spacers, each with pre-installed wheel studs, lug nuts and thread locker compound.
Not included: wheels and tires.
















