Overview
The Baer Brakes 4262097B is a black rear disc brake system for Ford 9 inch rear ends with Torino (late big) bearing housing ends, sold as a complete Extreme Plus kit. Each side gets a 14.0 inch 2-piece rotor clamped by a 1-piece monoblock 6S caliper with 6 pistons, and the backing plate carries a park brake shoe that covers parking on the same axle.
The system suits high-performance builds that see repeated heavy braking. Stainless braided hoses and NAS hardware are included, and the rotor arrives pre-assembled, so the rear setup is ready to mount once fit is confirmed.
Key features
- Six-piston 6S caliper built as a single monoblock piece in Phoenix, Az
- Caliper body CNC machined from U.S.-sourced 2618 aluminum forging
- Black powder coated finish
- Stainless pistons and abutments paired with noise suppression clips
- Staggered piston layout to reduce uneven pad wear
- Dual seals guarding against dust, weather and pressure
- Slotted, drilled, zinc-plated two-piece rotor with billet aluminum hat
- Park brake shoe assembly carried in the backing plate
Heat and pad selection
High-performance builds often push the rear brakes harder than a stock setup, so pad compound matters as much as the hardware. Friction material should suit the heat your driving produces, whether that is repeated downhill runs or fast street use. Pads are a consumable, and changing them while the rotor surface is in good shape keeps braking feel consistent.
The rear rotor also sees heat from the parking brake when it is used on a grade. Inspect the rotor face at each pad change for scoring, heat cracks and uneven thickness. Measure thickness at several points around the ring, since a drilled and slotted rotor can wear unevenly near the holes and slots.
- Match the pad compound to your typical braking loads
- Bed in new pads with moderate stops before heavy use
- Replace the rotor when it is worn past its minimum thickness
Specifications
| Brand | Baer Brakes |
|---|---|
| Part number | 4262097B |
| UPC | 844165035978 |
| Sold as | Kit |
| Axle | Rear |
| Axle flange | Ford 9 inch Torino / late big bearing |
| Caliper | 6S, 1-piece monoblock, fixed, 6 pistons |
| Caliper color | Black |
| Rotor outside diameter | 14.0 inch |
| Rotor construction | 2-piece, vented |
| Rotor material | Iron with aluminum hat |
| Rotor surface | Slotted, drilled and zinc plated |
| Rotor thickness | 1.25 |
| Pad type (FMSI) | D1247 |
| Hose material | Stainless steel |
| Lug count | 5 lug |
| Wheel bolt pattern | 5×4.50/5×4.75 |
| Minimum wheel diameter | 18.0 inch |
| Includes park brake | Yes |
| Includes park brake cables | No |
| Template | N085P |
| Grade | Performance |
| Country of origin | US |
Vehicle fitment
It targets the Ford 9 inch rear axle with Torino (late big) bearing housing ends and five lugs on a 5×4.50/5×4.75 bolt pattern. Confirm your axle housing and your vehicle’s year, model and trim before buying.
Compare the wheel you plan to run against the template before buying, since fit across wheel styles is not guaranteed. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Test the rotor and caliper against your wheel with Baer’s N085P template, since fit varies across wheel styles. Park brake cables are not part of this kit, so plan for them separately. The stainless braided hoses are supplied, so no separate hose purchase is needed for this axle.
What’s included
The kit contains the black 6S monoblock caliper, the 2-piece slotted rotor with billet aluminum hat, the backing plate with park brake shoe assembly, stainless braided hoses, and the NAS hardware that secures the rotors.
Not included: front rotor, park brake cables, and lug nuts.















