Overview
Part number 4141022B is the Baer Brakes Extreme Plus front brake system with a black 6S caliper, built for Dodge Ram 1500 trucks from 2002 through 2010, Ram 1500 trucks from 2011 through 2018, and Ram 1500 Classic body trucks from 2019 through 2024. The kit pairs a 1-piece Monoblock, 6-piston caliper with a 15-inch, 2-piece slotted, drilled and zinc-plated rotor.
The caliper body is CNC machined from 2618 aluminum forging, powder coated and assembled in Phoenix, Arizona. The 15-inch rotor fits most wheels 19 inches or larger, but wheel fit cannot be guaranteed for every style, so measuring wheel clearance is part of the job.
Key features
- Monoblock 6-piston 6S caliper in a 1-piece design
- Staggered pistons designed to minimize uneven pad wear
- Stainless steel pistons, abutments and noise suppression clips
- Dual seals guarding against dust, weather and pressure
- Powder coated caliper body made from forged 2618 aluminum
- Slotted, drilled, zinc-plated 2-piece rotor with a billet aluminum hat
- Uses the D1247 pad type (FMSI number).
Caring for the black finish
The black caliper uses a powder coated finish over forged aluminum, which protects the body from road salt and grime. Clean it with mild soap and water and a soft brush. Avoid strong solvents, wire brushes and high pressure washing aimed directly at the seal area, since those can lift the coating over time.
Brake dust builds up fastest on the inner face of the rotor and around the pad area, so wipe it away during routine checks. Pad material and rotor surface wear together, so a worn pad can score the slotted face. Check the rotor for grooves, a raised lip at the outer edge and uneven thickness before reusing it.
- Use mild soap rather than solvents
- Keep dust away from the seal area
- Check the rotor face for deep grooves
- Replace pads before they reach their wear limit
Specifications
| Brand | Baer Brakes |
|---|---|
| Part number | 4141022B |
| UPC | 844165040330 |
| Kit type | Kit |
| Axle position | Front |
| Caliper | 6S, 1-piece Monoblock, 6-piston, fixed |
| Caliper color | Black |
| Caliper body | 2618 aluminum forging, powder coated |
| Pad type | D1247 (FMSI number) |
| Rotor outside diameter | 15.0 inch |
| Rotor thickness | 1.25 |
| Rotor construction | 2-piece, vented |
| Rotor material | Iron with aluminum hat |
| Rotor surface | Slotted, drilled and zinc plated |
| Minimum wheel diameter | 19.0 inch |
| Lug count | 5 lug |
| Wheel bolt pattern | 5×139.7mm |
| Template | N118U |
| Hoses | Re-uses OE hoses |
| Grade type | Performance |
| Country of origin | US |
Vehicle fitment
It fits Dodge Ram 1500 trucks from 2002 through 2010, Ram 1500 trucks from 2011 through 2018 and Ram 1500 Classic body trucks from 2019 through 2024.
Trucks outside the Ram 1500 ranges, including Ram 2500 and 3500 models, are not covered by this list. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Rotors arrive pre-assembled with NAS high grade stainless hardware, and all mounting brackets and hardware are included, so the system is ready to fit once wheel clearance is confirmed. Use template N118U with the wheel you plan to run. Test the brakes at low speed after installation, then drive gently until they feel normal.
What’s included
The Extreme Plus front system with the black 6S caliper, a 15-inch rotor pre-assembled with stainless hardware, and all mounting brackets and hardware.
Not included: lug nuts.














