Overview
The Baer Brakes Extreme Plus rear brake system, part 4262205R in red, is a rear disc brake kit for Ford 9 Inch early big bearing rear axle housing ends with a 5×5.00 bolt pattern. It combines a 1-piece monoblock, 6-piston, 6S caliper with a 14 inch, 2-piece slotted and drilled rotor and a 1-piece park brake shoe assembly built into the backing plate. It is aimed at owners of big bearing 9 inch rear ends who want a Baer rear disc setup engineered for that housing end.
Baer’s backing plate doubles as the caliper mount. The rotors arrive pre-assembled with NAS high grade stainless hardware, and stainless braided hoses are included. Because the 14 inch rotor fits most wheels 18 inch or larger, Baer recommends checking the N085P template against your wheel before choosing one, since it cannot guarantee fit with every wheel style.
Key features
- 1-piece monoblock, 6-piston, 6S caliper, manufactured in Phoenix, Az
- Red powder coated caliper finish
- CNC machined from U.S.-sourced 2618 aluminum forging
- Stainless steel pistons, abutments and noise suppression clips
- Staggered pistons to minimize uneven pad wear
- Dual seals for dust, weather and pressure
- 2-piece slotted, drilled, zinc-plated rotor with billet aluminum hat
- Stainless braided hoses included
Before you buy
A monoblock caliper with a two-piece rotor changes the rear brake package in several ways. The rotor needs enough clearance from the backing plate and the caliper body, and the wheel must clear both. Before ordering, confirm the housing flange, bolt pattern and wheel diameter together rather than one at a time, because an error in any one of them leaves the kit unusable.
Park brake cables are a separate purchase on a kit like this, so measure the existing cable runs before ordering. Brake fluid and bleeding are routine parts of the install, and a technician familiar with rear disc systems can check the routing of the braided lines.
- Measure the existing park brake cable length
- Confirm wheel clearance before buying
- Plan for a complete brake fluid bleed
Specifications
| Brand | Baer Brakes |
|---|---|
| Part number | 4262205R |
| UPC | 844165037293 |
| Sold as | Kit |
| Axle | Rear |
| Axle flange | Ford 9 Inch Early Big Bearing |
| Wheel bolt pattern | 5×5.00 (5 lug) |
| Caliper | 6S, 1-piece monoblock, fixed, 6 pistons, red |
| Rotor outside diameter | 14.0 inch |
| Rotor thickness | 1.25 |
| Rotor type | 2-piece, vented, slotted and drilled |
| Rotor material | Iron with aluminum hat |
| Pad FMSI number | D1247 |
| Template | N085P |
| Minimum wheel diameter | 18.0 inch |
| Hose material | Stainless steel |
| Includes park brake | Yes |
| Grade type | Performance |
| Country of origin | US |
Vehicle fitment
This kit is built for Ford 9 Inch early big bearing rear axle housing ends with a 5×5.00 bolt pattern. These details identify an axle housing end rather than a single vehicle, so confirm the flange type and bolt pattern on your axle before ordering.
Confirm your vehicle’s year, model and trim before ordering, and verify the housing flange type and bolt pattern on your axle.
Installation notes
The rotor and hat arrive as one pre-assembled unit with stainless hardware. The 1-piece park brake shoe assembly sits inside the backing plate that also carries the caliper, so the park brake is not a separate bolt-on piece. Check clearance with the N085P template and an 18 inch minimum wheel before installing. Rear brake work should be done by a qualified technician who bleeds the hydraulic system afterward.
What’s included
The kit includes the 6S monoblock caliper, the 14 inch 2-piece rotor with billet aluminum hat, the pre-assembled stainless hardware, the 1-piece park brake shoe assembly, the backing plate and stainless braided hoses.
Not included: you will need your own park brake cables, wheel lug nuts and a front-axle rotor.















