Overview
The 4262255B is a black-caliper, 13 inch rear disc brake system for Ford 8 inch and 9 inch rear axles with small bearing housing ends. It is built for 5 lug wheels on 5 x 4.50 and 5 x 4.75 inch bolt circles, and the minimum wheel diameter is 17.0 inch.
This is the black version of the SS4 Plus system. It uses a 4-piston S4 caliper, a 2-piece rotor with an aluminum hat and a park brake shoe housed in the backing plate. Pre-assembled stainless hardware and braided hoses come with the set.
Key features
- 4-piston S4 caliper in a black finish
- 13.0 inch 2-piece slotted, drilled, zinc plated rotor with billet aluminum hat
- Rotor thickness of 0.81 inch
- Dual seals for dust, weather and pressure
- DR1-C pad type (FMSI DR1-C)
- Park brake shoe assembly built into the backing plate
- DOT approved braided hoses
- CNC machined, powder coated aluminum components
Wheel bearing and hub checks
The rear brake assembly sits beside the wheel bearing and hub, so bearing condition affects braking as well as ride. Play in the bearing, heat discoloration or grease leaks around the hub seal all deserve attention while the rotor is off. A bearing that runs loose can shift the rotor and cause pulsation.
Park brake shoes live inside the backing plate and wear slowly, so check the lining, springs and self-adjuster whenever that hardware is exposed. Replace any shoe that shows uneven wear along with its partner. Cleanliness matters too, since grit between friction faces wears both sides of the setup quickly.
- Check bearing play with the wheel off
- Inspect the hub seal for leaks
- Clean the backing plate before reassembly
Specifications
| Brand | Baer Brakes |
|---|---|
| Part number | 4262255B |
| UPC | 844165027959 |
| Caliper | S4, 4-piston, fixed, black |
| Rotor | 13.0 inch outside diameter, 2-piece, vented, slotted and drilled, zinc plated, billet aluminum hat |
| Rotor thickness | 0.81 inch |
| Rotor material | Iron with aluminum hat |
| Bolt pattern | 5 x 4.50 / 5 x 4.75 inch, 5 lug |
| Axle flange | Ford 8 inch and 9 inch small bearing |
| Minimum wheel diameter | 17.0 inch |
| Brake pad | DR1-C (FMSI) |
| Hoses | Braided, DOT approved |
| Park brake | Shoe assembly included; cables not included |
| Template | S135H |
| Country of origin | US |
Vehicle fitment
It is built for Ford 8 inch and 9 inch rear axles with small bearing housing ends. Confirm the axle flange type before ordering, along with your vehicle’s year, model and trim.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Test-fit the S135H template against the wheel before mounting the rotor, because the minimum wheel diameter is 17.0 inch. The park brake works through the shoe in the backing plate, but park brake cables are not part of this set.
What’s included
The set includes the black S4 caliper, 13.0 inch rotor, backing plate with park brake shoe, and braided hoses with stainless hardware.
Not included: the park brake cables and the lug nuts for the 5 lug hub.















