Overview
The Baer Brakes 4262318FR is an SS4 Plus Deep Stage rear brake kit built for Ford 9 Inch Early Big Bearing rear housing ends, supplied as a dual set with Fire Red S4 calipers. It is a drag race brake for heavy, fast cars that might also see street use, with 11.0 Inch two-piece slotted, drilled rotors and a 5×4.50/5×4.75 bolt pattern. The kit notes say the axle flange needs to be 5.75 Inch.
Baer designed the Deep Stage system to fit smaller 15 inch wheels while keeping features from its larger brake systems. The kit includes four calipers, pre-assembled rotors with stainless hardware and mounting hardware, and high friction pads in the DR1 or HB100 pad type. It has no park brake, and fitment follows the axle housing type rather than a vehicle list.
Key features
- Four S4 calipers with 4-piston design and 1.75 inch pistons
- Hard anodized aluminum pistons, stainless steel abutments and noise suppression clips
- Fire Red powder coated finish
- Two-piece slotted, drilled, zinc plated rotors with billet aluminum hats
- Hats drilled for 5/8 inch wheel studs
- High friction drag race pads in the DR1 or HB100 pad type
- Dust and weather seals, manufactured in Phoenix, Az
- Designed to fit most 15 inch and larger wheels
Heat management on drag runs
High friction drag race pads work best once they reach operating temperature, and the rotor and pad pair need time to bed in before a hard run. Repeated launches build heat quickly in the rotors and calipers, so both the brake fluid and the pad compound matter. Drag use puts the brakes under heavy load in short bursts, which is different from stop and go street traffic.
Heat also changes how the rear kit behaves on the street. Cold pads can feel grabby or noisy, and a high friction compound may not suit a daily driver’s braking habits. Anyone running this kit on a heavy car should allow a cooling period after runs and avoid parking with the brakes hot.
- Bed in pads before the first timed run
- Use fresh fluid rated for high temperature use
- Inspect hoses and fittings after each event
Specifications
| Brand | Baer Brakes |
|---|---|
| Part number | 4262318FR |
| UPC | 844165038399 |
| Caliper | S4, 4-piston, fixed type |
| Caliper color | Fire Red |
| Calipers included | 4 (1.75 inch pistons) |
| Rotor type | 2-piece, vented |
| Rotor outside diameter | 11.0 Inch |
| Rotor thickness | 1.02 |
| Rotor material | Iron with aluminum hat |
| Surface | Slotted, drilled and zinc plated |
| Lug count | 5 Lug |
| Wheel bolt pattern | 5×4.50/5×4.75 |
| Minimum wheel diameter | 15.0 Inch |
| Axle flange | Ford 9 Inch Early Big Bearing |
| Axle flange requirement | 5.75 Inch |
| Pad type | DR1 or HB100 (FMSI DR1), semi-metallic, performance grade |
| Park brake | No |
| Template | S125A |
| Emission code | 6 |
| Country of origin | US |
Vehicle fitment
The kit is built for Ford 9 Inch Early Big Bearing axle housing ends with a 5.75 Inch axle flange. Confirm the housing type matches your axle before choosing it over another 9 inch configuration.
Only the Early Big Bearing housing is described here. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Rotors and mounting hardware come pre-assembled with NAS high grade stainless hardware, but lug nuts and brake hoses are not included and must be supplied separately. Because the kit has no park brake, a vehicle that needs one must use a separate parking brake system. Have the brakes installed and bled by someone trained in hydraulic brake work.
What’s included
Dual rear caliper set with four S4 calipers and 1.75 inch pistons, pre-assembled rotors with NAS high grade stainless hardware, and mounting hardware.
Not included: lug nuts, brake hoses, and a park brake.















