Overview
The Baer Brakes Extreme Plus rear brake kit, part number 4262688S, is a 15.0 inch two-piece slotted and drilled rear brake system for the 2012–2018 Ford F-150. It also fits the Ford Raptor for 12-18 in 2WD and 4WD configurations.
The system uses a one-piece monoblock 6-piston 6S caliper in silver, paired with D1247 pads. The calipers are CNC machined from 2618 aluminum forging and built in Phoenix, AZ. The kit re-uses the stock manual park brake and original hoses, so it centers on the rear brake hardware.
Key features
- One-piece monoblock 6-piston 6S caliper in silver with a powder coated finish.
- Stainless steel pistons, abutments and noise suppression clips.
- Staggered pistons designed to minimize uneven pad wear.
- Dual seals for dust, weather and pressure.
- Two-piece slotted, drilled and zinc-plated rotor with a billet aluminum hat.
- Rotors come pre-assembled with NAS high grade stainless hardware, and brackets and hardware are included.
- A front rotor is included with the kit.
Monoblock calipers and wheel clearance
A monoblock caliper is a single casting that holds all six pistons, which keeps caliper flex low under hard braking. For a truck used for towing or steep grades, that rigidity helps the pedal feel stay consistent. Pads are changed by sliding them out of the caliper bracket, so the bracket and pin hardware need checking at each service.
Wheel clearance matters more with a larger caliper, so check the template against the wheel before mounting, including the back spacing. Pad choice affects how the caliper wears, and sticking slide pins can cause uneven pad wear on the rear. Clean and lubricate the pins during brake service, and inspect the stock park brake hardware when the truck is serviced.
- Confirm wheel offset clears the caliper body
- Check the stock park brake adjustment at each service
- Inspect OE hoses for cracking before reinstalling
Specifications
| Brand | Baer Brakes |
|---|---|
| Part number | 4262688S |
| UPC | 844165047476 |
| Sold as | Kit |
| Caliper | 6S monoblock, six-piston, floating |
| Caliper color | Silver |
| Caliper material | 2618 aluminum forging |
| Pistons | Stainless steel |
| Rotor outside diameter | 15.0 inch |
| Rotor thickness | 1.25 |
| Rotor type | 2-piece, vented |
| Rotor material | Iron with aluminum hat |
| Rotor surface | Slotted, drilled, zinc plated |
| Pad type (FMSI) | D1247 |
| Wheel bolt pattern | 6x135mm |
| Lug count | 6 Lug |
| Minimum wheel diameter | 19.0 inch |
| Drive | 2WD, 4WD |
| Applications | Ford F150 12-18, Ford Raptor 12-18 |
| Brake hose | Re-uses OE hoses |
| Park brake | Stock manual park brake |
| Template | N125U |
| Emission code | 6 |
| Country of origin | US |
Vehicle fitment
The kit fits the 2012–2018 Ford F-150. Its applications also cover the Ford Raptor for 12-18, with 2WD and 4WD drive.
Ford F-150 model years outside 2012 through 2018 and other Ford trucks are not covered. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The kit reuses the original hoses and the stock manual park brake, so those parts stay in place. Check the N125U template against your wheels, because the minimum wheel diameter is 19.0 inch and wheel style affects clearance. Brake work is safety-critical, so have a qualified technician complete the install and bleed the system.
What’s included
Silver 6S six-piston monoblock calipers, two-piece rotors pre-assembled with stainless hardware, brackets, hardware and a front rotor.
Not included: Lug nuts. The kit re-uses the stock park brake and original hoses rather than supplying new ones.














