Overview
The Baer Brakes 4262318C is a Deep Stage dual rear brake kit for Ford 9 Inch Early Big Bearing rear housing ends, finished with Clear S4 calipers. Its 11.0 Inch two-piece rotors are slotted, drilled and zinc plated, with a 5×4.50/5×4.75 bolt circle. The axle flange needs to be 5.75 Inch, which makes the housing type the key check before buying into this kit.
The SS4 Plus is a drag race design for heavy, fast cars that may also see street use. It is built for wheels of 15 inch and larger, uses high friction pads for drag race applications, and comes without a park brake, hoses or lug nuts.
Key features
- Clear powder coated S4 calipers with 1.75 inch pistons, four in the set
- Stainless steel abutments and noise suppression clips in the caliper assembly
- Pre-assembled rotors with NAS high grade stainless hardware
- Billet aluminum hats drilled for 5/8 inch wheel studs
- High friction drag race pads in the DR1 or HB100 pad type
- Dust and weather seals on each caliper
- 11.0 Inch two-piece slotted, drilled and zinc plated rotors
- Made in Phoenix, Az
Pad choice for drag use
Pad choice shapes how the Clear S4 setup behaves between runs. High friction drag race pads grip hard once warm, but they can be noisy when cold and may leave more dust on the wheels than street pads. They also wear rotors faster, so the choice affects how often the rotors need inspection.
A drag pad set suits short, hard bursts of braking, while daily driving usually calls for a softer compound. Many owners keep a separate street pad set and fit the drag pads for race days. Whichever pad is chosen, bed it in on the rotor surface before relying on it under load.
- Match pad compound to how the car is driven
- Check rotor surfaces for heat cracks after hard use
- Keep pad material records when changing compounds
Specifications
| Brand | Baer Brakes |
|---|---|
| Part number | 4262318C |
| UPC | 844165029731 |
| Caliper | S4, 4-piston, fixed type |
| Caliper color | Clear |
| Calipers included | 4 (1.75 inch pistons) |
| Rotor type | 2-piece, vented |
| Rotor outside diameter | 11.0 Inch |
| Rotor thickness | 1.02 |
| Rotor material | Iron with aluminum hat |
| Surface | Slotted, drilled and zinc plated |
| Lug count | 5 Lug |
| Wheel bolt pattern | 5×4.50/5×4.75 |
| Minimum wheel diameter | 15.0 Inch |
| Axle flange | Ford 9 Inch Early Big Bearing |
| Axle flange requirement | 5.75 Inch |
| Pad type | DR1 or HB100 (FMSI DR1), semi-metallic, performance grade |
| Park brake | No |
| Template | S125A |
| Emission code | 6 |
| Country of origin | US |
Vehicle fitment
The kit is built for Ford 9 Inch Early Big Bearing housing ends with a 5.75 Inch axle flange, which is the only axle type this kit is built for.
Other 9 inch housing variants are not part of this kit’s design. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Lug nuts and brake hoses are not included, so both must be supplied separately. Check the pre-assembled rotors against the 5.75 Inch flange requirement during setup. A drag race brake system like this should be installed and tested by someone experienced with hydraulic brakes.
What’s included
Four Clear S4 calipers with 1.75 inch pistons, pre-assembled rotors, NAS high grade stainless hardware and mounting hardware.
Not included: lug nuts, brake hoses, and a park brake.















