Overview
Black is the caliper finish on part number 4301391B, the Extreme Plus front brake system with a 14-inch two-piece rotor and a one-piece monoblock six-piston 6S caliper. It is built for six-lug, 2WD half-ton Chevrolet and GMC trucks from 1960 to 1989.
The system relies on CPP nodular iron 2.5-inch drop spindles that are not part of the package. The caliper is powder coated, and the rotor is iron with a billet aluminum hat that arrives pre-assembled with NAS stainless hardware. Hubs carry premium bearings packed with Redline synthetic grease.
Key features
- One-piece monoblock 6S caliper with six pistons, built in Phoenix, Arizona
- Caliper machined from U.S.-origin 2618 aluminum forging
- Powder coated black finish
- Staggered pistons reduce uneven pad wear
- Pistons and abutments are stainless, with noise clips
- Dual seals against dust, weather and pressure
- Two-piece zinc-plated rotor with slotted and drilled face and billet aluminum hat
- Billet dust caps and hubs with premium bearings
- Stainless steel braided hoses
Caliper seal checks
Dual seals keep dust, water and pressure out of the caliper bore, but seals still age. A caliper that pulls to one side, feels spongy or leaks fluid at the bleeder or fittings needs inspection before the vehicle is driven much further. Most seal problems start at the piston rather than the pad surface.
Stainless pistons resist corrosion, yet the slide pins and bushings are the usual source of uneven wear on a fixed caliper setup. Lubricate the pins with a grease rated for brake service and keep petroleum products away from rubber seals. A quick check during each pad change catches most problems early.
- Look for fluid residue around piston boots
- Check the pad wear pattern for one-sided wear
- Replace brake fluid on a regular service interval
Specifications
| Brand | Baer Brakes |
|---|---|
| Part number | 4301391B |
| UPC | 844165041009 |
| Caliper | 6S, one-piece monoblock, six-piston, fixed |
| Caliper color | Black |
| Rotor outside diameter | 14.0 inch |
| Rotor construction | Two-piece, vented, slotted and drilled |
| Rotor material | Iron with aluminum hat |
| Brake pad FMSI number | D1247 |
| Drive | 2WD |
| Axle | Front |
| Lug count | 6 |
| Wheel bolt pattern | 6 x 5.50 inch |
| Wheel stud size | 1/2-20 x 2.25 inch |
| Minimum wheel diameter | 18.0 inch |
| Hose material | Stainless steel |
| Spindle type | CPP nodular iron 2.5-inch drop spindle |
| Spindles included | No |
| Lug nuts included | No |
| Template | N117P |
| Grade | Performance |
| Country of origin | US |
Vehicle fitment
Four-wheel-drive versions are not covered. This black kit fits 1960–1986 C10 trucks, 1967–1986 C10 Suburbans, 1960–1966 and 1987–1989 Suburbans, the 1966 GMC 1000, 1960–1965 GMC 1000 Series trucks, 1975–1978 and 1967–1974 C15 and C15/C1500 trucks, and 1979–1986 C1500 models.
Chevrolet C10 pickups after 1986 are outside the fitment range. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
This kit is designed for CPP nodular iron 2.5-inch drop spindles, so verify the spindle match before mounting the caliper. Six lug nuts are needed for the 6 x 5.50 inch pattern, and none come with the kit. The 14-inch rotor calls for an 18-inch or larger wheel, so check clearance on the N117P template before final assembly.
What’s included
The package contains the front rotor, 6S caliper, billet hubs with premium bearings and dust caps, mounting brackets, stainless braided hoses and included hardware.
Not included: the drop spindles and lug nuts.














