Overview
The Baer Brakes Extreme Plus silver front brake system, part number 4301390S, is a five-lug kit for 2WD half-ton Chevrolet and GMC C10 and C15 trucks. It uses a 5 x 5.00 inch bolt pattern, a 14-inch two-piece rotor and a one-piece monoblock six-piston 6S caliper.
This kit is built for CPP nodular iron 2.5-inch drop spindles only, and those spindles are not included. The silver caliper and billet aluminum hubs come preassembled, but the spindles must be supplied separately before installation begins.
Key features
- Five-lug design on a 5 x 5.00 inch bolt pattern
- One-piece monoblock six-piston 6S caliper with a powder coated silver finish
- Two-piece slotted, drilled and zinc-plated rotor with billet aluminum hat
- Rotor hardware is NAS high grade stainless, preassembled at the factory
- Staggered pistons to even out pad wear
- Dual seals protect against dust, weather and pressure
- Billet hubs with premium bearings and Redline synthetic grease
- Stainless braided hoses
Five-lug wheel care
Five-lug wheel patterns depend on clean seats and sound studs, so the hub face deserves attention whenever the wheels come off. Rust or debris between the wheel and hub can cause vibration that is often blamed on the brakes. Lug nuts should match the seat style of the wheels in use.
A drop spindle swap can change the wheel to hub relationship, so confirm the first set of lug nuts is seated fully before driving. Check nut torque after the first few miles and again after a tire rotation. Wheels with different offsets may need spacers, which change the stud length required.
- Use lug nuts with the correct seat style
- Clean the hub face of rust before mounting
- Re-torque after the first short drive
Specifications
| Brand | Baer Brakes |
|---|---|
| Part number | 4301390S |
| UPC | 844165040989 |
| Caliper | 6S, one-piece monoblock, six-piston, fixed |
| Caliper color | Silver |
| Rotor outside diameter | 14.0 inch |
| Rotor construction | Two-piece, vented, slotted and drilled |
| Rotor material | Iron with aluminum hat |
| Brake pad FMSI number | D1247 |
| Drive | 2WD |
| Axle | Front |
| Lug count | 5 |
| Wheel bolt pattern | 5 x 5.00 inch |
| Wheel stud size | 1/2-20 x 2.25 inch |
| Minimum wheel diameter | 18.0 inch |
| Hose material | Stainless steel |
| Spindle type | CPP nodular iron 2.5-inch drop spindle |
| Spindles included | No |
| Lug nuts included | No |
| Template | N117P |
| Grade | Performance |
| Country of origin | US |
Vehicle fitment
Listed vehicles include GMC 1000 pickups in 1966, GMC 1000 Series trucks from 1960 to 1965, GMC C15 and C15/C1500 trucks from 1967 to 1978, GMC C1500 models from 1979 to 1986, Chevrolet C10 trucks from 1960 to 1986, C10 Suburbans from 1967 to 1986, and Suburbans from 1960 to 1966 and 1987 to 1989.
Every listing is a 2WD application. Trucks outside these years, including 1990 and later Suburbans, are not covered. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Use the separately supplied 2.5-inch CPP nodular iron drop spindle, the only spindle type named for this kit. Five lug nuts are needed for the 5 x 5.00 inch pattern, and they are not in the box. Check the N117P template against any 18-inch or larger wheel you plan to run before the final mount.
What’s included
The kit includes the front rotor, 6S caliper, billet aluminum hubs with bearings, billet dust caps, mounting brackets, stainless braided hoses and hardware.
Not included: the CPP drop spindles and lug nuts.














