Overview
The Baer Brakes 4302268B is a black Pro Plus 13.0 inch rear brake system for GM small pattern 10/12 bolt bearing-on-axle housings. Its six-piston caliper squeezes a two-piece slotted, drilled rotor, and the backing plate that anchors the caliper also carries the park brake shoe assembly.
The kit is rated Performance grade and sized for wheels 17 inch or larger. Use the Q110H template to check clearance, and test it against the wheel you plan to run, since wheel designs differ.
Key features
- Black-finished six-piston caliper with stainless pistons, abutments and noise suppression clips
- Staggered pistons aim to minimize uneven pad wear
- Dual seals handle dust, weather and pressure
- Two-piece slotted, drilled and zinc-plated rotor with a billet aluminum hat and pre-assembled NAS high grade stainless hardware
- One-piece modern park brake shoe assembly housed inside the backing plate
- Components CNC machined from US sourced forged or billet aluminum, powder coated
- Compatible with D0731 pads; stainless braided DOT approved hoses included
Care and inspection
Rear brake assemblies sit in a harsh spot, close to road spray and grit, so the caliper body and piston area should be inspected regularly. Look for fluid weeping from the bleed screw, rust on the sliding surfaces and any sign that a dust seal has torn. A clean caliper bore and fresh fluid keep the pistons moving freely, which helps the pads release evenly after each stop.
Park brake shoes wear slowly, but the adjustment should be checked when the parking brake feels loose or travels further than it used to. Keep the backing plate free of mud so the shoe assembly can move as designed. When the wheels come off for pad service, wipe the rotor hat and check the studs and lug seats for cracks or deformation before the new wheels are fitted.
Specifications
| Brand | Baer Brakes |
|---|---|
| Part number | 4302268B |
| UPC | 844165043201 |
| Sold as | Kit |
| Caliper | 6-piston, fixed, 6P |
| Caliper color | Black |
| Rotor outside diameter (rear) | 13.0 inch |
| Rotor type | 2-piece, slotted, drilled, zinc plated |
| Rotor material | Iron with aluminum hat |
| Rotor construction | Vented |
| Rotor thickness | 1.1 |
| Minimum wheel diameter | 17.0 inch |
| Axle flange | GM small pattern 10/12 bolt bearing on axle |
| Wheel bolt pattern | 5×4.75/5×5.00 |
| Lug count | 5 lug |
| Pad FMSI number | D0731 |
| Hose material | Steel braided, DOT approved |
| Template | Q110H |
| Grade | Performance |
| Country of origin | US |
Vehicle fitment
The footprint is the GM small pattern 10/12 bolt bearing-on-axle rear end, used on Buick, Olds and Pontiac applications, with a 5×4.75/5×5.00 bolt pattern. Measure the axle flange and bolt pattern to confirm the match.
Installation notes
Plan to source park brake cables separately, because the kit does not include them. Lug nuts also need to be obtained on their own. Block the vehicle and support the rear axle on stands before the old brake parts come off.
What’s included
Included are the six-piston caliper, the two-piece rotor with pre-assembled stainless hardware, the backing plate with park brake shoe assembly, and stainless braided hoses with hardware.
Not included: park brake cables, lug nuts and the front rotor.















