Overview
The Baer Brakes Pro Plus 14.0 Inch rear brake system in Monster Green, part number 4262152MG, is a rear disc brake kit for Ford 9 Inch Torino (Late Big) bearing housing ends with a 5×4.50/5×4.75 inch bolt pattern. Its 6P six-piston calipers clamp onto 14.0 inch rotors.
Each kit combines two-piece slotted, drilled and zinc plated rotors with NAS fasteners that Baer uses to support consistent bite and heat control. Baer’s backing plate doubles as the caliper mount and holds a one-piece park brake shoe, and stainless braided hoses plus the mounting hardware are included.
Key features
- Six-piston 6P calipers, two-piece design, manufactured in Phoenix, Arizona.
- Staggered piston layout intended to even out pad wear.
- Stainless steel pistons, abutments and noise suppression clips.
- Billet aluminum hat on the two-piece rotor.
- Monster Green powder coated finish on the machined aluminum caliper parts.
- Dual seals for dust, weather and pressure.
- Steel braided hoses with DOT approval.
Caliper and pad matching
Six-piston calipers spread clamping force over a larger pad area, which suits heavier vehicles and frequent braking on rough terrain. Pad compound matters as much as the caliper, so choose a pad built for the duty you expect, whether that is mostly street use, towing or occasional trail runs. Mismatched pads can cause squeal, uneven wear or fade on long descents.
Two-piece rotors allow the hat to be replaced without discarding the disc, which can lower the cost of routine service. Keep the mounting hardware torqued to the value in your service information and recheck it after the first few drives. Inspect hoses for cracks or bulges, and clean and lubricate the caliper slide surfaces during pad changes.
- Match pad compound to driving style
- Replace worn hub hardware when the rotor is changed
- Inspect braided hoses for chafing
- Clean slide pins during pad service
Specifications
| Brand | Baer Brakes |
|---|---|
| Part number | 4262152MG |
| UPC | 90127950210 |
| Sold as | Kit |
| Caliper | 6P six-piston, fixed type |
| Caliper color | Monster Green |
| Rotor outside diameter | 14.0 inch |
| Rotor thickness | 1.15 |
| Rotor construction | Vented, 2-piece |
| Surface type | Slotted, drilled and zinc plated |
| Axle | Rear |
| Axle flange | Ford 9 Inch Torino/Late Big Bearing |
| Wheel bolt pattern | 5×4.50/5×4.75 |
| Lug count | 5 lug |
| Minimum wheel diameter | 18.0 inch |
| Hose material | Steel braided, DOT approved |
| Pad FMSI number | D0731 |
| Template | Q082P |
| Park brake | Included; park brake cables not included |
| Grade type | Performance |
| Emission code | 6 |
| Country of origin | USA |
Vehicle fitment
It is designed for Ford 9 Inch Torino (Late Big) Bearing housing ends. Check that against your axle, and use template Q082P to confirm wheel clearance.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Measure your hub against the 5×4.50/5×4.75 bolt pattern before fitting, since this kit is sized for both patterns. Wheels 18 inches or larger are the listed minimum, and a qualified technician should bleed the brake lines after installation.
What’s included
Six-piston 6P calipers in Monster Green, two-piece rotors with pre-assembled NAS hardware, the park brake shoe assembly, stainless braided hoses and all mounting hardware.
Not included: park brake cables.
