Select your vehicle

Baer Brakes SS4 Plus Brake System Rear Ford 8.8 Inch C-Clip Rear Ends W/2.5 Inch Axle Standoff 4 Lug Red – 4262257R

Baer Brakes

$2,049.91In stock
Buy on Amazon

See similar parts on Amazon

Price and availability as of Nov 19, 2026 2:30 AM MST, from Amazon.com, and subject to change. The Amazon listing has the current details.

Check out with your Amazon account. Amazon handles delivery and returns.

Slickrock 4X4 is a participant in the Amazon Associates Program. As an Amazon Associate we earn from qualifying purchases.

  • Baer Brakes 4262257R red SS4 Plus rear brake kit for Ford 8.8 inch C-clip rear ends
  • Red S4 four-piston caliper on a 13 inch two-piece slotted and drilled rotor
  • Four lug, 4×4.25 inch bolt pattern; fits most wheels 17 inches or larger
  • Park brake shoe assembly included, park brake cables not included
  • Stainless braided hoses included; lug nuts and front rotor not included

Description

Overview

The Baer Brakes 4262257R is a red SS4 Plus rear brake kit built for Ford 8.8 inch C-clip rear ends and includes a 2.5 inch axle standoff with a park brake. A red S4 four-piston caliper clamps a 13 inch, two-piece slotted and drilled rotor, and the kit is arranged for a four lug wheel on a 4×4.25 inch bolt circle.

Baer’s mounting plate holds the caliper and also houses a one-piece park brake shoe assembly, so the parking function is part of the rear unit. Stainless braided hoses are supplied. The kit is intended for Ford 8.8 rear ends that need a four lug rear disc setup with a red caliper finish.

Key features

  • Four-piston S4 caliper with hard anodized aluminum pistons and stainless abutments
  • Dual seals for dust, weather and pressure
  • Powder coated caliper finish in red
  • CNC machined from US sourced forged or billet aluminum
  • Two-piece slotted, drilled, zinc-plated rotor with billet aluminum hat
  • Rotors pre-assembled with NAS high grade stainless hardware
  • Noise suppression clips
  • Stainless braided, DOT approved hoses

Preparing the rear axle

A rear disc conversion changes how the axle handles braking, so the parts around the brake assembly matter as much as the caliper itself. On a Ford 8.8 with a C-clip design, the axle bearings, bearing retainer and axle shafts carry the braking load through the wheel, so their condition should be checked before the new kit goes on. A worn axle bearing or a loose retainer can cause wheel movement that no caliper will correct.

Pad selection and the parking function deserve attention before installation. The DR1-C pad type sets the friction material, so match it to the rotor and to how the vehicle is driven. The park brake shoes sit inside the backing plate, so cable routing should be planned early. Brake fluid in the stainless hoses should be bled after the caliper is fitted, and the system should be pumped to a firm pedal before any driving.

  • Check axle bearings and retainer for play
  • Confirm park brake cable routing before mounting
  • Re-check hardware torque after the first drives

Specifications

Brand Baer Brakes
Part number 4262257R
UPC 844165028109
Package type Kit
Caliper S4, four-piston, floating
Caliper color Red
Rotor type Two-piece, vented, slotted and drilled
Rotor outside diameter 13.0 inch
Rotor thickness 0.81
Rotor material Iron with aluminum hat
Surface Slotted, drilled and zinc plated
Pad type (FMSI) DR1-C
Hose material Steel braided, DOT approved
Park brake Included; cables not included
Wheel bolt pattern 4×4.25 inch
Lug count 4 lug
Minimum wheel diameter 17.0 inch
Axle flange Ford 8.8 inch
Template S135H
Grade Performance
Country of origin US

Vehicle fitment

It targets rear axles with a Ford 8.8 inch flange and C-clip design, along with a 2.5 inch axle standoff. Confirm fit for your vehicle’s year, model and trim before ordering.

It fits most 17 inch or larger wheels. Test the S135H template against your wheel to confirm clearance before the assembly is mounted.

Installation notes

Park brake cables are not included and must be sourced separately. Rotors come pre-assembled with stainless hardware, so the rotor and hat should be checked for correct seating before the assembly is mounted. Have a qualified technician confirm wheel and caliper clearance on the rear axle before the vehicle is driven.

What’s included

The kit includes the red S4 four-piston caliper, the 13 inch two-piece slotted and drilled rotor, the backing plate with park brake shoe assembly, stainless braided hoses and the stainless hardware for the rotors.

Not included: park brake cables, lug nuts and the front rotor.

Specification

Shipping weight 55 lbs
Package dimensions 15 × 15 × 15 in
brands

Sold as

Kit

Wheel bolt pattern (in)

4×4.25

Lug nuts

4 Lug

Rotor type

2-Piece

Rotor style

Slotted, Drilled

Rotor construction

2-Piece

Rotor material

Iron w/Aluminum Hat

Front rotor included

No

Park brake

Yes

Lug nuts included

No

Axle housing flange type

Ford

Country of origin

US

Questions & Answers

Is the 4262257R vehicle specific?

No. It is made for Ford 8.8 inch C-clip rear axles with a 2.5 inch axle standoff. Confirm your axle flange and your year, model and trim before ordering.

What are the wheel bolt pattern and minimum wheel size?

The bolt pattern is four lug at 4x4.25 inches. The minimum wheel diameter is 17.0 inches. Test the S135H template against your wheel to confirm clearance.

Does the red S4 kit include park brake cables?

No. A one-piece park brake shoe assembly is housed in the backing plate, but park brake cables are not included and need to be sourced separately.

What is in this kit?

The kit includes a red S4 four-piston caliper, a 13 inch two-piece slotted and drilled rotor, a backing plate with park brake shoes and stainless braided hoses. Lug nuts and the front rotor are not included.

How do I know if the axle bearings need replacing?

Look for play at the wheel, noise from the axle area, or grease leaking past the seal. Those signs point to worn bearings, and they should be inspected before a new rear brake kit is installed.

Should the brake fluid be replaced when the kit is installed?

Fresh fluid is a sensible choice when the system is opened for a rear conversion, since old fluid can carry moisture. Bleed the new lines fully so no air remains in the caliper before the vehicle is driven.

Ready to order?

Order this part on Amazon and check out with your Amazon account. Amazon handles delivery and returns.

Buy on Amazon