Overview
The Baer Brakes 6919272 is a left-side, two-piece replacement brake rotor measuring 13.850 inch in diameter and 1.250 inch thick. It is a vented cast iron rotor with a slotted, drilled and zinc-plated surface, made as a replacement rotor ring for select Baer Brake systems.
This rotor is directional, made for the left side of the vehicle only. The bolt pattern is 12 holes on a 7.50 inch bolt hole circle. Confirm the hub and bolt pattern match your vehicle before installing it.
Key features
- Two-piece construction with a vented cast iron rotor ring
- Curved vane design intended for optimum cooling
- Slotted and drilled surface for the brake pad face
- Directional brake surface, made for the left side only
- Purpose-built castings for the rotor.
- Designed for rotor stability and resistance against distortion
- Dynamic balanced for vibration-free performance
- Zinc-plated finish
Pairs, pads and bedding-in
Rotors are usually replaced in pairs on the same axle so braking stays even from side to side. Because this rotor is directional, the opposite side needs its own rotor, and the two should not be swapped. Pads, hub faces and caliper hardware are worth inspecting at the same time, since a worn pad can score a new rotor quickly.
Bedding in new pads and rotors transfers an even layer of friction material to the rotor face. Make several moderate stops from low speed before normal driving, and let the brakes cool between runs. Stepped flange rotors can have a raised mounting edge, so confirm the flange seats flat against the hub before tightening.
- Clean rust and debris from the hub face
- Check caliper slide pins for free movement
- Keep the existing tone ring safe if one is fitted
Specifications
| Brand | Baer Brakes |
|---|---|
| Part number | 6919272 |
| UPC | 844165052272 |
| Axle position | Left |
| Construction | Two piece |
| Brake surface | Directional |
| Rotor type | Vented |
| Surface type | Slotted, drilled and zinc plated |
| Material | Cast iron |
| Outside diameter | 13.850 inch |
| Nominal thickness | 1.250 inch |
| Mounting bolt hole circle diameter | 7.50 inch |
| Mounting bolt hole quantity | 12 |
| ABS tone ring included | No |
| Grade type | Performance |
| Emission code | 6 |
| Country of origin | USA |
| Sold as | Each |
Vehicle fitment
It is made for select Baer Brake systems.
Installation notes
Because the rotor is directional and made for one side only, check that the left-side rotor is the one going on the left hub before mounting it. Rotors are sold individually, so a pair requires a second rotor for the opposite side. The ABS tone ring is not included, so keep any existing tone ring from the old rotor if your system uses one. Brake work affects stopping ability, so bed in the pads and test the brakes at low speed before normal driving.
What’s included
One left-side replacement brake rotor, sold as Each.
Not included: ABS tone ring, and the rotor for the opposite side of the vehicle.
