Overview
The Auburn Gear 5420133 is an H/P Series limited slip differential for Toyota 9.5 inch axles, with 32 splines. The axle location is given as front or rear, so check which end your Toyota uses before ordering.
The H/P Series is built for smooth, streetable use with a preloaded tapered cone clutch. It carries a 4 year replacement D-REX program.
Key features
- Smooth, streetable operation
- Preloaded tapered cone type clutch
- Built for Toyota 9.5 inch axles
- 32 splines
- Front or rear axle location
- Includes a 4 year replacement D-REX program.
Preparing for a limited slip swap
A limited slip differential changes how power splits between the wheels, so the gear set and clutch need to match the rest of the drivetrain. Because this unit replaces the whole assembly, expect to drain and refill the gear oil and check the carrier bearings and pinion seal during the job. Worn axle bearings or a leaking seal are good reasons to address the work during the same visit.
Most limited slip units use a friction modifier additive in the gear oil. Using the wrong oil can cause chatter in turns or slow clutch engagement, so follow your installer’s gear lube guidance. Break in the clutch gently during the first stretch of driving.
Signs the old unit is worn include chatter or clunking when turning, one wheel spinning freely, and grinding that changes with steering. Check the axle diameter and spline count before buying, and have a professional handle the setup.
Specifications
| Brand | Auburn Gear |
|---|---|
| Part number | 5420133 |
| UPC | 70000545208 |
| Series | H/P Series |
| Differential type | Limited slip assembly |
| Clutch system | Preloaded tapered cone type |
| Axle manufacturer | Toyota |
| Axle location | Front or rear |
| Axle type | Toyota 9.5 inches |
| Axle spline count | 32 splines |
Vehicle fitment
Universal fit is shown, but the unit is sized for the Toyota 9.5 inch axle and no vehicle years, models or trims are named. Check your axle diameter and 32 spline count before buying.
The Land Cruiser Pro Series in this range has a different spline count and is a separate part number. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Because this is a whole differential assembly, it replaces the existing unit rather than a single gear or cover. Confirm the 32 spline count and the axle location before fitting, and have a professional handle setup and break-in.
What’s included
It is a complete limited slip differential assembly. Check the package contents against your installation before starting.








