Overview
The Auburn Gear 542018 is an H/P series limited slip differential assembly for GM 10 bolt axles, 8.5 inch size, with 28 splines. Auburn Gear lists its axle location as front or rear.
This H/P unit is built for smooth, streetable limited slip action, with a preloaded tapered cone clutch for on and off road use. Auburn Gear backs it with a 4 year D-REX replacement program.
Key features
- Preloaded tapered cone type clutch system
- Smooth, streetable limited slip action per the brand
- 28 spline axle connection
- It is designed for either front or rear axle location.
- 4 year replacement D-REX program
Before you buy
A limited slip differential changes how torque reaches each wheel. With a preloaded cone clutch, the spider gears are held so that the wheel with more grip receives more drive, which helps the vehicle leave a slick surface with less wheel spin. Most limited slip units need a gear oil with friction modifier, and it is worth checking the fill level after the first few drives.
Because the carrier is replaced as a complete assembly, plan on the ring and pinion, bearings and axle seals being inspected at the same time. Look for metal in the old gear oil, leaks at the pinion seal, and clunking on tight turns, which can point to a worn clutch. Ask the installer whether the gear ratio matches the rest of the axle before the vehicle is driven.
- Inspect the axle bearings while the carrier is out
- Use the friction modifier the oil requires
Specifications
| Brand | Auburn Gear |
|---|---|
| Part number | 542018 |
| UPC | 81499600018 |
| Product line | H/P series |
| Axle manufacturer | GM |
| Axle location | Front or rear |
| Axle type | GM 10 bolt, 8.5 inches |
| Axle spline | 28 splines |
| Differential type | Limited slip assembly |
Vehicle fitment
This assembly is listed by axle type rather than by vehicle: GM 10 bolt axles at 8.5 inches with 28 splines, for front or rear location. No year, make, model or trim is given.
It fits GM 10 bolt axles at 8.5 inches with 28 splines. Other 10 bolt designs and spline counts are outside this fit, so confirm your vehicle’s year, model and trim before ordering.
Installation notes
The 28 spline count and 8.5 inch housing need to match the axle you are replacing. A qualified driveline shop should confirm the setup and install the unit.
What’s included
It is a complete limited slip differential assembly.









